Search results

ok here is the deal skyjacker makes a 18 inch lift for a ranger it cost about $2000 but it is every thing you need i think if you dont believe i can go take a picture thursday and show an 18 inch coil spring lift and it will fit right on an explorer because my 4 inch is off a ranger no mods...

ok i have a 91 sport auto trans. i was running 32x10.50 swampers on it for about 10,000 miles and the tranny started blowing out fluid at the front like something crazy and it got toasted so i put in a new one ran some 215x75 on it while traveling frow WV to TN for about 4,000 miles came home...

well Tom i put a 4 inch suspension lift on mine with 35 inch tires and i took off my sway bar and i coul not tell a bit of diffrence in body roll at all i can still hang a turn pretty good i mean there was a little diffrence but hell i got alot bigger tires to but its not bad and if your...

is it chrome or is it black if it is chrome just take some steel wool and some wax and wax it with the steel pad let it dry and wipe off easy as 1-2-3

thanks stevevb i just bought the trany used 4 weeks ago and it was $700 used up it didnt fry it but it probably did the ratio is 3:55i no it is high but i never had the money to change them yet

zac ihave a 91 sport with a 4" superlift it has been a great kit i would check there site http://www.superlift.com they run about $650 you get the coils radius arm drop brackets the brackets to drop your I-beams shocks and i think they give you a flip kit for the back but it is better if you...

ok here it is 4.0 auto trany i have 4 inch suspension lift and i just put a set of 35x12.50 on it and yesterday i took it for a long drive up and down hills on the highway and when i got to where i was going i could smell trany fluid i stopped to park and when i hit the gas to move up a little...

thanks now i see how

how do you do that

can someone tell me how to get my x pics over to the side with my info please thanks

if your truck is 4x4 i dont think the hubs will fit the center hole and the might not even fit on the rear because you have that little thing on the end of the rear end to fit over but other than that up and down and in and out should fit just try it

i would say go with a 32x11.50 on a dished wheel i have a 91 with a 4 in superlift suspension and i am running 35x12.50 on it and they rub only when i cut realy sharp they hit the bumper and the fender flare my i fit 32 stock on these wheels and only rubbed in a major bind my wheels are 15x10.5...

lizardtrac did you email my xplorer101 on this site cause i think my hotmail site is messed up

is there any body on here from WV i need some more places to go wheelin and some people with xplorers to go let me know __________________ 91 sport 4" superlift 3" body lirt warn transformer brush guard 35x12.50x15 custom paint

man that would be cool as all get out i have some good trails to hit in southern WV to so PA VA Maryland Ohio all good drives for me let us know _____________________ 91 sport4" superlift 3" body lift warn transformer brush guard 35x12.50x15 custom paint

i had a bronco II with the same problam i took off the trim inside stuffed it full of cotton and never had any more trouble that was with 6 12" rockfords the rattle is the rods going to the latches and that makes the handle rattle

i agree with the second shop to i just got out of a alignment class at nashville auto diesel college and you just need new cams put in like he said the springs are not bad they make a camber kit for those that change camber up to 3.75 degrees i need them for mine to if you want to do it cheaper...

check the ground for the amp i had that problem many time i used to compete with stereos i would say that is your problem _____________ 91 sport 4"superlift 3"body lift warn transformer brush guard 35x12.50x15 custom paint

i dont know that it would miss but usually if a cool pack goes bad (EVERY) time i ever seen one go bad the vehicle would run fine turn it off and would not start back at all until the pack was changed i would pull them off and try cleaning them if that dont work trace your ignition wire from the...

you have a body mount bolt there check and make sure it is tight and make sure te radius arm bushings are still good you might have a torn bushing _________________ 91 sport 4"superlift 3"body 35x12.50 tires warn trans former brush gaurd custom paint

yes all you have to do is remove your front drive shaft there is 2 brackets that hold up both I-beams drop out the beams and put in a 2 wheel drive they bolt in the same holes you will still be able to keep your transfer case but you can get an out put yoke off a 2 wheel and still the drive...

who knows what the biggest tire i can fit on a 91 sport with 7'' of lift and 10.5 x 15 inch wheels also does anyone know how long the body bolts are from the front to the back

mike I would take your test light and ckeck your hot wire frome the fuse box down to the light switch you have to have power to the switch for the switch to make the connection for the lights to work