Search results

Yeah I took my intake off to check my work around the manifold again, the gaskets are all in place with no tears and it’s definitely sealed. I did notice the hose connecting my air intake and the oil had a little bit of it sticking out, fought to push it all the way in and cleared the code...

Alright I’ll be looking at all of that today

Yeah unfortunately I’m not finding anything for my situation. The handle connector is in tact, so is the threaded push rod. I see and hear the mechanism moving when I pull the exterior handle that I replaced. Door opens from the inside still. Weird thing happens on the door tho, when you pull...

I bought a stock 2000 ford explorer xls 2wd , and when I bought it 2 exterior door handles were broke (front passenger and driver rear). Both doors open from the inside. I’ve just replaced the door handles on all the doors so they match, but the 2 that had broken ones still do not open from the...

Sorry I just saw this. No it didn’t do it before the cam sensor fix. And I don’t have a fuel pressure tester. I was letting idle today while I replaced the exterior door handles and the light came on for a p0174 cylinder bank 2 too lean. Currently trying to find what is the cause.MAF voltage and...

Yes I’ve done a reset/relearn process, sorry I should included that in my post. It got much better after that but still drops that idle down and stumble a little bit. When I start it up it doesn’t crank and turnover immediately like it did before, but it’s by no means a long or super rough start...

I have a 2WD 2000 ford explorer XLS with the 4.0L OHV. I just replaced the camshaft position sensor due to engine code p0340. Since it’s been replaced (about a day now), no engine light has shown up. Car accelerates fine, but when coming to a stop and once stopped and idling, the idle drops from...