Search results

Hey rick, i have the 89 BII and i was just looking at Perry's Fab & Fiber and i remembered how you got your conversion and i was looking at this for mine, Dead Link Removed , Did you have to drive over to Cali & leave your X there to have them do it or can you just purchase the fenders and do it...

I have a question about swapping mirrors. I have that 89 BII and wanted to know if I would ever be able to get a set of mirrors off like a 91 or so X and put them on mine? THere pretty much the same body style. If anyone could help me out that would be awesome, thanks!

OOPS [IMG]http://www.geocities.com/myhoofhurtz/101-0140_IMG.JPG[IMG]

I dont have a X but I got PICS I dont have a X but I got something fairly close >: P Here are some of my wheelin pics

I can see that, how many miles are on that beast?

Thanks, Ya I know, I was too lazy to make the images a smaller file :/

LOL I'm going to keep this 1 for a while, I'm gonna get a rolled X and take the 8.8,D35 + 4.0 then put some flared out fenders then paint it Charcoal Gray and eventually lift it more and squeeze in some 33's

Hey fellas, I haven't posted here in a while and just got around to adding a few pictures to my web site from just out messing around after school and stuff, so go check em out and tell me what you think! >: P Here's the link ------> Dead Link Removed

Hey every one, just wanted to see whats up and if anyone knows where i could find a rolled x around mesa area just to check it out or something, thanks. Check this out Dead Link Removed

I have a 89 BII with 50 series single in, duel out and even though I have a little engine, it sure helped out and I only have 2" exhaust because I needed some back pressure.

I havn't posted in a while and would just like to say whats up to every one. My BII has been going through some changes lately, nothhing much but for a great laugh, watch this http://www.confound.com/animations/weee.php

I also would like to know some info on Shackles, what are they and what do they do?Where do there go?

Hmmmm, any one know any websites that I could check out some blocks?

I have add a leafs and when i put them in(My leaf springs are brand new from www.jamesduff.com which are 3 in lift springs) and it raised it another 3 in which i cant have. I just need some lift blocks about 3/4 to 1 inch tall

I was searchin through the net and couldnt find anything good. I am looking for about 3/4 - 1 inch blocks for the rear of my 89 BII, if you could show me some sites that have some, i would greatly appreciate it.

I just put 01 X seats in my 89 Bronco II and i had to take off my old racks and put them on the new seats, the holes pretty much lines right up and my seats went right in, dunno if that will help. Cody

Hey, I was wondering if any one could gimme some pointers on making some quick disconnects, and FYI, i cant just put in a pin or anything through the one that mounts on my I-Beam because i have duel shock mounts and there is a bracket that goes around the orginal bracket on the shock mount for...

Hey every one, Arizona Foresty was opened back up as of July 19 and that makes me HAPPY. I want to check out Box Canyon a little more, so if any one that lives near me, Apache Junction, offers to go out, I will be more than happy to but remember i only got a 3" lift with a locker in the rear and...

On my BII my apss side would go down but not up, so inside the motor there are some gears that are about 25$, take it apart and see how they look, its worth a shot.....

Hey, I was just wondering because there is a wrecked 01' X at a wrecking yard and it has Grey regular buckets and i was wonder if they would fit in my 89 BII, they look pretty damn close and I am going down there tommorrow morning and maybe pick em up so please respond ASAP, THX

Welcome aboard!

Well right now im placing a bid on a set of R95' Ranger seats Drivers (power) pass is not. they look comfy as hell and i wouldn't want leather, im in AZ member :P

Hey Rick I got a question for ya, you wouldn't happen to have any X bucket seats or know where any are? I'm lookin to pick up a set for my BII and havn't had any luck yet so if ya could help me out that would be great! THX

35 PSI in each >: ) thats what i run my 31x10.50 BF Mudders on 15x8's

Yea i checked out ebay, they had some explorer and ranger seats, the X ones looked pretty good but they were in a set of four and i only need the two front buckets, i cant wait to get a set! :p

Hey every one, I was just wondering if any one knew where I caould pick up a set of explorer bucket seats on the web maybe. I have the local junkyards keeping an eye out for me for when one comes in and if the seats are in good condition im gonna pick em up and get rid of this retarded 60/40...

Well, my dad and I have decided that when the engine goes(2.9L) were gonna put the 4.0 from a '92 X when they get on in the junkyard, the things we will have to change are the motor mounts, engine, of course, and all the wireharnessing and computer stuff and hopefully we'll be set!

Hmm im not sure im much help but the O2 sensor should be on the air intake, im not quite sure about anything else, sorry bud

Does your A/C Compresor make any noise at all? I'm on Mr Boyle's side with this one, think the Comp. is goin

Heh, i guess it doesnt work, >: ( !

No im not hung up, i put on the E-brake and got out for a pic >: ) If you right click and click show pic it should work.

Here's a shot of my articulation in the rear, good enough for me >: ) Dead Link Removed

Well, i guess i dont know how to put ina pic, heh, i think i have to be an Elite?

Hey, I got my truck's rear end to articulate a little bit check it out, and like he said before, a 2 dimensional photo doesn't do quite the justice as if you were there

Hey man, Nice setup you got there, those Alpine Type R's must hit pretty damn hard, i know at Ultimate Electronics they had the Alpine Type S in a band pass box and it hit hard as hell, i was very surprised, the type r would prolly be my next choice, that or the JL Audio

Some times when you replace bushings, some Polyuerothane Bushings require to be greased up, if not after a while of wheelin or muddin, even everyday driving they can begin to squeek, try that, may save you some money, you never know!

True, the one in Arizona is 0% conatined, there just worrying about evacutating all the people which was 30,000 in Show-Low alone and has allready started buring in Over-Gaurd

LMFAO my little beast is gutless, especially w/ A/C on and going up a hill! >: )

My Bronco II has a 2.9L engine which is 177 cubic inches, i wonder if any one could give me a guess on my horsepower? I have Flowmaster 50 series cat-back and a K&N filter? I know there aint **** for power but i just wanted to see what my good ol 6 hampsters on a wheel are pushin' out

Yea, we are in serious trouble over here, it kind of feels like im in the movie "Dantes Peak", all the videos they show of the burn, the sky is completely orange and dark grey and ash falling and the fire is about to rip in the city of Show-Low, it kinda sucks for my generation if the fire keeps...