Search results | Ford Explorer Forums

  • Register Today It's free!

Search results

  1. B

    A/c Compresser Problems!!

    The other day, while doing an oil change, I noticed that the a/c compresser was starting to stick. So I got some oil for it and put it into the system. I got a can of 134, and yes I have the conversion, and the a/c compresser blew up. Shot out white smoke and green stuff. I was wondering if...
  2. B

    Replaced Starter Solenoid....still problems starting!!

    Ok thats fixed... now next issue! Sunday I took out the starter and had it tested. It was pulling way to many amps (like 120 or so). So I replaced it, but I was having power problems also (every couple of times I would try to start it all the electricy would go out) So i cleaned and replaced...
  3. B

    Replaced Starter Solenoid....still problems starting!!

    thanks for that....i guess i will just replace the whole unit and wires too since i will be in there already. thanks for the help and i'll post you on how it goes tonight
  4. B

    Replaced Starter Solenoid....still problems starting!!

    can you replace just the solenoid on the starter...it looks likes its just one piece...but i have been unable to find just that solenoid at the parts store...i have found reman ones for around $130 so i really dont mind replacing the whole thing, but if its just the solenoid on the starter then...
  5. B

    Replaced Starter Solenoid....still problems starting!!

    Got it started last night Went down to the mall where it was sitting and i got under the car and tapped on the body of the starter and it started right up. After I got it home I tried to start it up again and nothing, got back under the car and gave a little tap..tap.. fired right up. Does...
  6. B

    Replaced Starter Solenoid....still problems starting!!

    Thanks I Will Try Switching Those Out For The Better Ones.
  7. B

    Replaced Starter Solenoid....still problems starting!!

    I Have Replaced The Termianls A While Ago, And Recently Cleaned The Termanals To Get The Corrosion Off. The Wierd Part Is That It Was Would Only Start When I Bridged The Terminals On The Solenoid, Now That I Have Replaced It, It Works Sometimes And Doesent Other Times. I Am Going To Look Into...
  8. B

    Replaced Starter Solenoid....still problems starting!!

    Last week I got in my explorer and it would not start. We jumped the solenoid and it started fine...so i went and replaced it...now every once in a while it gives me starting problems...the battery has been replaced recently..and now the solenoid but what else could it be...i got the chepo...
Back
Top