Search results

IAC??? Not sure about that one....what is it in english LOL I'm pretty sure that the MAF is what ford cleaned out but I'll make sure to check it anyway just in case.

About 2 weeks ago my X started idling rough so I took it to my "trusty reliable ford dealer" (yeah right lol). Anyway they did there mojo to it and came up with nothing as far as computer codes, but they went ahead and reset the computer and cleaned out air reg valve (I think is what it is?). I...

Ok....so I can either do a SOA or a shakle to raise the rear right? Cause I think longer shakles would be a little easier than a SOA ...LOL

Ok, I hate to sound stupid....but what is a SOA? Its just not ringing any bells right now. I really dont know about getting a body lift right now...I have heard they are a real pain in the a*s!! But it is a possiblity....but 5" is not a bad start either...lol

I soon will have the $$$$ for the superlift, mags and tires....but heres the question.... If the 4" superlift is installed, is it possible to do a TT and add a leaf of something for the rear to get the 4" plus another 1-1.5 inchs from the TT? What would you do to the rear to get the height...

Before I got my 12's I was running two 10" Kicker comps in a sealed box. I was running 150 watts to each and they were rated at 450 ( If I remember right), and this was in a king cab ranger! If I turned it up over 1/2 way with a song with any kind of bass it would completely blur your vision...

I got my K&N on weds. and installed it that night, I drove it thurs and noticed just a hair better response and acceleration. Thurs. night I got out the drill and went to work!! I used a 3/8 bit and put just a little over 50 holes in it spaced out evenly around the housing. I noticed a...

My stock headlights were really good both low and high beams, but I replaced my stock bulbs with the sylvania cool blues and it was a good improvement, so for about 15 bucks a piece they are worth a try...and remember...never touch the bulbs when you put them in!!!

:redexp: :eek: There is one aspect everyone seemed to overlook......THE GROUND!!!!! If you do not have a very good ground on your amp it will cut out with the increase in power! If its a brand new sub...brand new amp....even running as small as a 10 guage wire it will not keep a amp from...

I have a 97 4wd, and I need a brush guard....let me know when you want to sell it and how much. I could really use one... I should have the $$$ for my lift & tires (33's) around the end of the summer or fall....wooohooo!!!! XXXplorer_NC

Yeah...depending on where it is in NC I would love to go...but remember....I am running completely stock right now so we would just have to take the trails that built up chevys and such take...lol I have visited your site already and I have seen some of the pics...where are you located at?

P.S. Here is my page about my X....Check it out!!! Dead Link Removed

Okay then....thanks for the responses!!! First of all...I have thought about running 33's and may seeing what I could do about fitting a set of 35's under it.....next....I was just thru winston salem today and Hendersonville is about 2 hours away....Its near Asheville (about 20...

X name Well....For mine I like "Suburban Assalt Vehicle" But I do use truck from time to time....and since I have a Ranger too it really confuses my wife! LOL

:thumbsup: Well, I found this site a few weeks ago and I can not belive all the info I have found so far! You guys are great! I have a 97 sport that if have only done minor stuff to ....sound system cosisting of 2 12" audiobahns, 1800 watts in 2 amps, pioneer deck and speakers.....I have the...

Cool...I will have to start looking for these parts and get my X rollin' high. Thanks for the help guys!:D

I have had my X for about a year and a half and I have been trying to find a lift kit, but I have come up with nothing! I heard that Superlift was going to make one, but then heard that for the cost of the kit and supply and demand that they scrapped making it. Am I just going to have to trade...