Search results

It did have Z instead T on the ford package I just copy and pasted from eBay auction listing below is actual package

I would post pictures of sensor and tool but it will not won’t let me have that option part number of tool is el-50448 for ford and gm and the sensor is f2gt-1a189-a 315mhz

I have had a new sensor installed. It is oem ford. It’s doing the same thing the old one was doing no air pressure reading 2 dashes. So I tried the automatic relearn where you go on off ignition and brake pedal sequence with new sensor didn’t work. Then I bought a tool that’s supposed to wake it...

Good new everything seems to be working fine

I apologize I was going off memory it was p0369

P0016 is no longer an issue but I did get circuit problem Bank 1 sensor B which according to what I have read has to do with plug or sensor

Yes got it running yesterday drove it for 45 mins no p0016 in pending or read. Then it gave me a bank 1 intermittent circuit sensor b don’t remember exact code but from what I can read this one is not timing of engine related. I check all the plug on cam sensors before I put it back together but...

It came from ford by way of vin number

First 2 is left side cam lock facing motor hard to get both sides the way it sits in vehicle. 3 is right cam lock. 4th is crank and 5 is picture from top unless if anyone sees anything wrong let me if not I’m putting it back together and seeing if p0016 going away

Yeah I did that had plenty of oil reset codes drove for 8 miles came home and it came back was running fine. Turned off back on a few times and got code. When I put it back together the first time I had marked chain with paint made lines with paint on head and crank then lined everything up and...

It’s just odd that no p0016 before but had it afterward which makes me think it’s timing but it did run just fine drove it for about 30 mins with no code then I looked in pending and it was there so took it all back apart got new chain so I could see timing marks. I think it takes 17 turns to...

Did not touch secondary chains main chain and water pump

Yes it’s locked

The pictures attached is with tensioner installed

135k mileage

I have cam locks on 3 dots aligned. This is my second attempt I marked everything and somehow after water pump change was getting p0016. It was running fine just every so often gave bank 1 sensor 1 out of phase . So took it back apart bought new chain. I just want to make sure that if the locks...