Search results

test for photo :salute:

Finally done,,!!!!!!! :D O,k, today I put in my ADL's, combined with my custom shackles I now have 6.5 in in back 5 in front. 3in BL and 2in TT the angle is perfect just a slight rise in the rear almost not noticeable but looks a lot better then the stock sag. Got my alignment yeaterday after...

Well it's a done deal,,,,almost,,,lol Well picked up my shackles from the machine shop,and my cam kit at 3 pm. Just couldn't wait,,,lol. So I got the cams in ,did the tt twist thank god I got my 2 in even with "L" rated softy bars,,,lol. Put my shackles on I made them overall length 9 in of 3/8...

Cool I'm gonna get the 2-1/4 in they come with hardware for 27 a set.. Thank's a million, you've been a very big help to my wallet,,,lol. Thank's.,Keith

Think I found the Cam kit part at Napa #NCP 2642979 Drive Trains : Four Wheel Drive Comments: Camber/Caster;From 0 To Plus Or Minus 1 3/4 Degrees Of Change; Also just found one with 2-1/4 Degrees of change at Napa This sounds like it...

Yes thank's been doing some reseach and I see what you mean. I could use those part numbers. Do they actually seat with the ball joints, wondering if new ball joints are a must.Never was fond of trying to get the old ones out when I worked on the line but that was over ten years ago,,,lol. But...

Thank's for the info very helpful..I called the alignment shop today to get a price he said 80.00 but since I'm gonna lift it 2in "hopefully" he said it might be more cuase he might have to make mods to compensate for my lift. Does this sound right ??????. And if so what mods, can't he shim it...

Will 33's fit ? O,k, I've read 22 pages, and can't find my answer. I have a 98 eddie buar 4.0 Sohc did the 3 in body lift. Have 3/8 stock being machined into shackles with 1-3/4 and in 2.5 in lift eye holes for leaf. Hope to get 2 in from ( L ) rated Torsion bars., " will get longer adjuster...