Search results | Ford Explorer - Ford Ranger Forums - Serious Explorations

  • Register Today It's free! Once registered you can join the Elite Explorers to eliminate ads from the website.

Search results

  1. C

    A4LD swap with 4R44E

    That's what I kind of figured. Thanks
  2. C

    A4LD swap with 4R44E

    Can I put a 4R44E transmission in a 93 Explorer to replace the A4LD that's in there? Thanks
  3. C

    1993 Explorer transmission swap

    Does anyone know if I can put a 4r44E in my 93 Explorer. It currently has an A4LD. Is the 4R44E compatible with a 93? Thanks
  4. C

    Rebuilt Transmission won't go into gear

    How do I air check the transmission? Could the symptoms I'm having be caused by a loose valve body?
  5. C

    Rebuilt Transmission won't go into gear

    I've actually contacted them before and there is a shop about 25 miles from me. They wanted to charge me close to $2500 for a rebuild. I think I'll start with putting another valve body on and if not I'll try replacing every seal in the thing.
  6. C

    Rebuilt Transmission won't go into gear

    What would you do at this point? I'm not wanting to spend a lot more money I'll tell you that much.
  7. C

    Rebuilt Transmission won't go into gear

    Should I just chance getting another salvage tranny instead?
  8. C

    Rebuilt Transmission won't go into gear

    I guess if I get a seal kit I could replace every seal in the thing and that should solve the problem. Right?
  9. C

    Rebuilt Transmission won't go into gear

    The torx bolt is tight. I didn't replace the whole center support, just the seals. As far as the reverse servo goes, I hope it's correct I left that up to the mechanic to install along with the valve body. I really didn't mess with the reverse band at all.
  10. C

    Rebuilt Transmission won't go into gear

    Yes I got that one on and all lined up I'm pretty sure there's only one way it lines up. This thing has been very frustrating but I have to take it out again anyway. Is there any other seals I should check? I replaced the center support and all the lip seals in the drums. I still can't figure...
  11. C

    Rebuilt Transmission won't go into gear

    You mean the round one that goes on the thin plate between the pump and case? Looks like a ring with no holes?
  12. C

    Rebuilt Transmission won't go into gear

    A4LD No reverse and slips in forward gears Newly rebuilt transmission has no reverse and goes forward when cold. Loses all power and slips when hot. Valve body or leaking seal inside the case?????
  13. C

    Rebuilt Transmission won't go into gear

    No difficulty at all. I'll try the Lucas. Could it have anything to do with the torque converter? Like if I didn't fill it with fluid before I put it in? There was some fluid in it but not even a quart.
  14. C

    Rebuilt Transmission won't go into gear

    It is a pressure issue. I actually was able to drive it home tonight. It seems to drive when it's cold, but after it warms up it slips until it eventually has no power at all and won't go anywhere. I'm leaning towards a leaking seal somewhere. I rebuilt that transmission myself and replaced...
  15. C

    Rebuilt Transmission won't go into gear

    I'm not sure if it's that simple. When I first started it and put it in Drive in went right into gear and went forward but then gradually lost pulling power. It's tries to go, like it moves a little, but doesn't go! I think it's maybe a valve body thing. I'm not sure!!!! I will check the cable...
  16. C

    Rebuilt Transmission won't go into gear

    Got the tranny back on and now there is no Reverse. When I put it in Drive it starts to go but then looses everything, like it's not staying engaged! I think it's time to sell!
  17. C

    Rebuilt Transmission won't go into gear

    Sure enough the inner gear was cracked. It actually burned and warped the TC spindle so the new gear wouldn't lock in. Luckily I had the salvage tranny for parts! Thanks for everyone's help.
  18. C

    Rebuilt Transmission won't go into gear

    It hasn't shown up yet. I'm hoping to get it removed today and hopefully work on the pump on Monday. Crappy thing about this whole situation is its snowing here and my son needs this vehicle pretty bad, and I have to work on it outside! Haha
  19. C

    Rebuilt Transmission won't go into gear

    Is there a way to drain all of the fluid out via the TC? I want to avoid any fluid spilling out when I remove the TC and the bell housing.
  20. C

    Rebuilt Transmission won't go into gear

    Could it be possible that the pump inner gears had broke for some reason?
  21. C

    Rebuilt Transmission won't go into gear

    Ok, just trying to rule out any other issues before I continue to pull this thing out again. I've got everything pretty much apart except the exhaust and bell housing bolts, oh and the transfer case. I would like to drain more fluid out of it as well. Can I do that somewhere on the TC? Looks...
  22. C

    Rebuilt Transmission won't go into gear

    After installing a new pump, does it need to be primed? How do I go about doing that?
  23. C

    Rebuilt Transmission won't go into gear

    Don't really want to spend the money on a tool, unless I can find one for less than $140.
  24. C

    Rebuilt Transmission won't go into gear

    The pump I received came with the gears out and one side of the inner gear has 2 bevels on it, which way does it go in? Thanks
  25. C

    Rebuilt Transmission won't go into gear

    The filter is the right one and it is installed correctly. I guess I will have to tear the thing out and replace the pump.
Top