Search results | Ford Explorer - Ford Ranger Forums - Serious Explorations

  • Register Today It's free! Once registered you can join the Elite Explorers to eliminate ads from the website.

Search results

  1. N

    Solved CV Axles

    So far my precision ones are holding up fine, but unless you have the receipt somewhere you can find it, they can't warranty it out like AutoZone can with their database. Idk who makes the AutoZone ones.
  2. N

    Solved CV Axles

    Trakmotive makes the O'Reilly's ones. Same axle, different box.
  3. N

    Low epc pressure on 5r55e

    This was left over from whenever the previous owner changed the fuel sending unit and didn't clean it out. Not much debris.
  4. N

    Low epc pressure on 5r55e

    Yep,I'm dropping the tank today. Engine wasn't running right and therefore couldn't shift right
  5. N

    Low epc pressure on 5r55e

    This popped up again, culprit is actually a plugged fuel filter causing the issue. This is from the cut open filter
  6. N

    Door relay box location

    There's a relay box up under the dash right of the steering column, that's the only one I know of on my 03.
  7. N

    Remain Valve body

    I can say CVB still makes quality valve bodies for these, put one in last week.
  8. N

    4wd shifting issues - transfer case

    When you're trying to get it out of 4wd, you should be Able to hear it shift in or out.
  9. N

    Low epc pressure on 5r55e

    So I reloaded the sct tune it had, then cleared the transmission adaptive tables and now it's doing great.
  10. N

    Low epc pressure on 5r55e

    It shifts nicer, but no, it still won't shift if you put it to the floor I'm gonna try taking the sct tune off and see if it still does it. I replaced the tps with a ford one, is there any other sensor that'll cause this?
  11. N

    Low epc pressure on 5r55e

    Swapped it out, made some dowel pins to help align it when reinstalling it. Put on a pan with drain too after getting an atf shower
  12. N

    Low epc pressure on 5r55e

    I'll be getting this to hopefully fix any issues, its from CVB. Also have the updated epc solenoid and bracket coming if I need it. Might be a month or so before it gets installed 5R55E, 4R55E Valve Body, Updated and Tested with Solenoids | eBay
  13. N

    Low epc pressure on 5r55e

    I redid the test and at 1000 RPM it is 45 PSI and at stall speed it is around 113 PSI. So that meets the test specs in drive. I did notice however when I'm coasting or when I let off, it drops extremely low into the single digits. Is this normal or is this an issue?
  14. N

    Low epc pressure on 5r55e

    I found shift rite ones for a little under 3. Thank you for the input. I was gonna try the updated BW epc and updated bracket first to see if that's it, but now I'm hesitant.
  15. N

    Low epc pressure on 5r55e

    Would I be better off getting an updated complete valve body or just modifying the one I have? It does have a sct tune, it shifted really nice and firm before, it does now intermittently.
  16. N

    Low epc pressure on 5r55e

    I was looking into a hesitation to shift under WOT on my 2003 5r55e. I have forscan lite on my phone with a obdlink mx reader. I noticed the epc pressure ranged from 10-65 psi while driving, which is low as per the Ford shop manual. If the valve body gasket was blown, wouldn't it not shift or...
  17. N

    5r55e update question

    Im trying to cure some inconsistent shifting in my 03 sport Trac with a 5r55e. Was the updated epc solenoid, bonded seperator plate and the other pieces in the valve body update installed from the factory on these? I noticed the update TSB stopped at the 2002 model year.
  18. N

    01 Transmission shifts fine but slips above 2500rpms

    How many miles are on the trans?
  19. N

    Complaint: Oil dipstick on my 2003 4.0 is dark brown!

    Yep, it's like a black oxide finish, comes right off
  20. N

    Complaint: Oil dipstick on my 2003 4.0 is dark brown!

    Just take a scuff pad to it to polish it, I did that on mine, problem fixed.
  21. N

    Seats

    They also swap from 01-05 sport tracs as well, I have seat tracks from a 2nd gen explorer in my ST.
  22. N

    Aftermarket wheel reliability

    I checked the wheel installation brochure for the replacement pro comps, states to use the factory torque spec and the ones listed are for when the others are not available, contradicting tech support. The new ions came in. I was curious about the thickness between the face of the wheel and the...
  23. N

    Aftermarket wheel reliability

    It was a browser issue, thanks
  24. N

    Aftermarket wheel reliability

    Is he on ebay? when I look up that website, it doesn't pull up. Good businesses and companies are something I'll gladly support.
Top