Search results

I was taking my rear bumper off (01 ranger) & messed up some of those U nuts that go on the frame that hold the rear bumper on ,can anyone give me info for them, size part num,where to get them & bolt size thx noel

they just twisted off when removing (except for 3 ), was wondering if anyone had any tricks for getting um out thx noel

I took my bed liner out & when doing this I broke off all the tie down cleat bolts this has happened to me before & I didn't fix them vary well so here I am again so could anyone tell me the best thing to fix them (01 ranger) thx noel

I have a 2001 ranger x cab 4 door that the 60/40 seat is shot so before I spent lots of $ I have to ask somebody that knows will any EX seat95-01 just bolt rite in or is there mods that have to be done & does it make a diff if its a reg EX or sport (I cant find a ranger seat ) thx for any help...

i was wondering if i could put ranger finders on my 96 EX or bumpers,grill,hood what ever if it would just bolt ?????? thx noel

i was thinking about getting another EX but was wondering if i should get a 4 door or a 2 door i have never had a 2 door or even driven one, so what are the pros or cons of ether thx noel

well it was beeping at me & someone said replace the lite bulb, so i did now the air bag lite is flashing at me 3 times then 2 it repeats that three times is that a 32 & if so what does it mean thx noel

i have a 98 ranger 4.0 auto my frinds exploder is doing the same thing my truck started beeping at me like 5-6 beeps about 3 times then it dont do it any more till i start it up again,check eng lite is on but its always on the only code is about the emmison something but that has been on...

i just test fit some 30-950-15 on my stock 96 ex & there ie all kinds of room all the way around at least 3'' on both sides of front tire & 31/2--4 on back but the web side says only 31 will fit am i messing something ??????? thx noel

are the 3rd members out of an 8.8 mustang the same as 8.8 3rd members in a ex or truck thx noel

i did but it still did not tell me if it came with 1 tghx noel

ttt

got 1 to work delete thx noel

got it,there was no fuse in the hole thx noel

somebody has some older stock 15" wheels he says they fit up to 93 so i am asking i thought 93 down & 94 up where the same fitment ?????????? thx noel

i know a lot of times when you do a job you find shortcuts to make it easier & sence i am extremly lazy,is there a easer way to change the front diff on a 98 EX then taken both wheel hubs off to pull the axles ??? like can you drop the diff far enough to get enough slack to pop axles out ...

thx for that reply,if i can change the t/c and save 200 that sounds like a no brainer to me

thx for the the reply thats the kind of info i needed they are both d4 axle codes could i change the ends around on the driveshaft to make it work only going to change what i have to wanted to know what would work before i spent any money thx noel

i know where there is a 98 EX 4x4 5.0 that the front diff froze up & busted the diff case & drive shaft ?????????? why ???? i can get it cheap my Qs is i have a 96 EX 4x4 5.0 will all of the 96 stuff front diff,driveshaft,axle & transfer case if needed swap to the 98 as its in better shape...

are the newer 4.0s any better then the older 4.0s like the troubles with the chains & tensionars ?????

thx for reply if thats the case then im good to go but with out knowing why the diff part # on most of parts i dont know which ones to use, sometimes they change the part # & it dont mean a thing but some times it does, like between forged & cast or a diff grind on cam i dont want to have...

need some help from some EX motor guros, here is the deal i got a 96 ex 5.0 no dizzy that needs a rebuilt,i also have a 90 stang 5.0 i took the 90 apart to see what shape the stuff was in (not bad 130k mi )the EX has 245k mi so am pretty sure its going to need a lot more machining work so i was...

need some help from some EX motor guros, here is the deal i got a 96 ex 5.0 no dizzy that needs a rebuilt,i also have a 90 stang 5.0 i took the 90 apart to see what shape the stuff was in (not bad 130k mi )the EX has 245k mi so am pretty sure its going to need a lot more machining work so i...

thx for the reply i thought they lasted for i long time,well i got them now so i am going to put them in but i will keep an eye on them & when they look like they are coming apart i well get some alum or steel ones thx noel