Search results

I was taking my rear bumper off (01 ranger) & messed up some of those U nuts that go on the frame that hold the rear bumper on ,can anyone give me info for them, size part num,where to get them & bolt size thx noel

I took my bed liner out & when doing this I broke off all the tie down cleat bolts this has happened to me before & I didn't fix them vary well so here I am again so could anyone tell me the best thing to fix them (01 ranger) thx noel

I have a 2001 ranger x cab 4 door that the 60/40 seat is shot so before I spent lots of $ I have to ask somebody that knows will any EX seat95-01 just bolt rite in or is there mods that have to be done & does it make a diff if its a reg EX or sport (I cant find a ranger seat ) thx for any help...

i was wondering if i could put ranger finders on my 96 EX or bumpers,grill,hood what ever if it would just bolt ?????? thx noel

i was thinking about getting another EX but was wondering if i should get a 4 door or a 2 door i have never had a 2 door or even driven one, so what are the pros or cons of ether thx noel

well it was beeping at me & someone said replace the lite bulb, so i did now the air bag lite is flashing at me 3 times then 2 it repeats that three times is that a 32 & if so what does it mean thx noel

i have a 98 ranger 4.0 auto my frinds exploder is doing the same thing my truck started beeping at me like 5-6 beeps about 3 times then it dont do it any more till i start it up again,check eng lite is on but its always on the only code is about the emmison something but that has been on...

i just test fit some 30-950-15 on my stock 96 ex & there ie all kinds of room all the way around at least 3'' on both sides of front tire & 31/2--4 on back but the web side says only 31 will fit am i messing something ??????? thx noel

are the 3rd members out of an 8.8 mustang the same as 8.8 3rd members in a ex or truck thx noel

got 1 to work delete thx noel

got it,there was no fuse in the hole thx noel

somebody has some older stock 15" wheels he says they fit up to 93 so i am asking i thought 93 down & 94 up where the same fitment ?????????? thx noel

i know a lot of times when you do a job you find shortcuts to make it easier & sence i am extremly lazy,is there a easer way to change the front diff on a 98 EX then taken both wheel hubs off to pull the axles ??? like can you drop the diff far enough to get enough slack to pop axles out ...

i know where there is a 98 EX 4x4 5.0 that the front diff froze up & busted the diff case & drive shaft ?????????? why ???? i can get it cheap my Qs is i have a 96 EX 4x4 5.0 will all of the 96 stuff front diff,driveshaft,axle & transfer case if needed swap to the 98 as its in better shape...

are the newer 4.0s any better then the older 4.0s like the troubles with the chains & tensionars ?????

need some help from some EX motor guros, here is the deal i got a 96 ex 5.0 no dizzy that needs a rebuilt,i also have a 90 stang 5.0 i took the 90 apart to see what shape the stuff was in (not bad 130k mi )the EX has 245k mi so am pretty sure its going to need a lot more machining work so i was...

need some help from some EX motor guros, here is the deal i got a 96 ex 5.0 no dizzy that needs a rebuilt,i also have a 90 stang 5.0 i took the 90 apart to see what shape the stuff was in (not bad 130k mi )the EX has 245k mi so am pretty sure its going to need a lot more machining work so i...

I read somewhere that if you only used a 1'' body lift that you didnt have to do any other mods to anything (steering,brake lines,hoses,wires ) just 1'' spacers can anyone verify that ?????.i know that its not much ! thx noel

found some man 4406s in junk yard but there is two of them XL34-7A195-AC and XL34-7A195-AB whats the diff anybody know ?????????? thx noel

was at the junkyard & found i think a 4406 out of an 98 expatiation that is supposed to be low mileage the # on a plastic tag on transfer are 4406-000-023, xl14-7a195-ad could somebody tell me if this is the one i need for my ranger v8 swap thx noel

could i use an elec shift 4406 in my truck with the stock shift knob on dash ???? i would like to do this in my 98 ranger with swap but am not going to buy a t/c till i find out if it will work. some one said that some one had done this but mite need wires changed any info or direction to...

i am going to do the swap on my 98 ranger 4x4 & have a 96 EX for donor.& have come to think that a 4406 would be the way to go but have two Q about the install first it says to move the holes for the engine plate mount to the right 1/2" i am not sure i know what they are talking about (engine...

if you replaced your elec 1354 in a ranger with an elec 4406 would your shift button work the same (or work ) ????

is it harder to put a 1356 in a ranger doing a 302 swap then a 4406 ??????? can not find a lot about using a 1356 in swap ?????????????

i am in the market for a manual 1354 my Q is when its just sitting on the floor is there any way i can tell if its any good or junk ??????????? i have been reading all kinds of post but have not run across this,so if there is a post could some one steer me to it or just answer my Q thx noel