Search results

Try pulling the fuse to reset the memory. I believe there is a safety feature where it stops sending power to the motor if it isnt working properly.

Its on the back of the motor by the firewall, and it is pretty miserable to get to.

I replaced mine a couple years ago. It really isn't difficult. I want to say there were 4 or 5 bulbs that twist in, and then there is one that is wired in behind the rotary fan switch. You just have to pull your eatc out and remove the screws around the plastic facing. it will pull off and...

Ok. I will give the tan one a try today. I did email the company again but haven't received a reply as it is the weekend. Just want to get this thing working so I don't feel like I threw 50 bucks out the window! Thanks for.your help!

I tried wiring it to the light blue/pink wire it harness 2 that you mentioned. The steering wheel controls still wouldn't work. I did notice however that I got the solid LED rather than the flashing LED on the Axxess unit itself.

Anyone installed this? I have a 98 Explorer Eddie Bauer and a pioneer MVH-560BT head unit. It says to wire the red wire to ignition, black to ground and red/gray to the number 9 pin on factory harness. I tried that it wouldn't work. I emailed axxess and they said it had to be hooked to the...

I did run the EATC trouble codes. Looks like I have an actuator short. Would the actuator have any control over the re-circulation door?

I'm looking for any info I can get on the re-circulation door. Mine appears to not be working. I can't get it to open/close. I have the EATC on a 98 eddie bauer. I would say it is closed right now but I'm not sure that is the right term. It is pulled in close to the interior and I can...

try sending Ped5Stang a PM. He may have one.

I'm looking for a bracket for the emissions canisters on my 98 4.0 SOHC.

I need some help finding out what this is called. It hooks to the vapor canister on my 98 SOHC Eddie bauer edition. On one picture you can see where it broke, if I could just get that part, that would be great, but if I need to buy the entire piece, so be it. As of now I don't even know what...

Does anyone happen to have a picture of where the tubes connect to the canister?

Awesome, I can track that hose down. Do you have any idea how it connects to the canister? Is it that broken piece I showed in the picture?

Here is a pic of what looks to be a broken piece on the top of one of the canisters. Is there supposed to be a hose of some sort that connects here?

98 Explorer Eddie Bauer. SOHC. I was replacing my air ride with the strutmasters kit this weekend. Since I was under there and have been fighting an emissions code, I also replaced the fuel filler neck. To get to te drivers side rear shock I needed to remove that rusty bracket that holds the...

I'd be interested in the door handle

I can't think of any reason an extra fuse would cause any harm. Its more of an extra protection than anything. A fuse just kills power to the unit in case of a power surge. I remember a few years ago ford had a factory recall for something with cruise control. I think it was something with...

Looking to buy a Tan factory subwoofer cover/grill. I cracked mine when swapping out the sub. Needs to fit a 98.

Do you have any idea what it would cost to ship the spare rim to minnesota?

The bolt you refer to behind the fender skirt, is that on the manual antenna? I don't recall taking one off there from the power antenna. I only remember the large bolt on the mast.

I have the power antenna. The motor works fine, but I've already replaced the mast twice. Minnesota winters are hard on them. I'm sick of the power ones breaking, is there a normal non power antenna that I can use instead? One that will just slide right in, without having to fabricate anything?

http://www.strutmasters.com/Ford-Explorer-Air-Suspension-Conversion-Kit-p/-xpl-4.htm

First check the fuse under the hood. It controls cruise control and horn. If that's not it, its likely the clockspring.

No. I meant thank you for explaining why I do need it and it is not overkill.

Thanks for explaining that! I have the step down already in my cart to order, but I was wondering if it was unnecessary. I do appreciate the explanation as to why it is not.