Search results

firestone tires...j/k

your 2 12s will hit harder, your 1 15 will hit lower frequencies. Do you just want some bump or are you trying to have the best on the block, and what kind of music do you listen to? If you listen to more rock/alternative, get the 12's. If you listen to more rap get the 15. Either way they will...

Can't say that I do, are'nt most kick panels custom made?

13 or 14 either way this setup will put out some pumping bass!

http://www.crutchfield.com/S-gdzkYgVul1d/cgi-bin/ProdGroup.asp?g=530&avf=Y Ok Correction its 350 nonamped and 500 amped new, I'd check ebay. Or if you want to build one yourself a few people on this site have done that also, just gotta search. I started building one but lost interest and just...

Here is a good pic http://www.crutchfield.com/S-gdzkYgVul1d/cgi-bin/ProdView.asp?g=232750&id=morephotos&pi=2&i=12044U105&display=XL#Tab

I don't think the distance has anything to do with it, as normally the larger an antennae is the better your signal gets, and technically you adding wire to it made it a longer antenae. I have'nt seen this configuration your talking about before (the rca type connector to a normal wire) Here...

There are a one or two companies that make a insert (box with small sub) for that little cubby hole area, they come with amps and without amps (as in you'll need to get one). For the amped one (a guess as I'm to tired to search) will cost you approx 300 bucks. Check out crutchfield.com to find...

That amp is perfect for a dual voice coil 2 ohm sub (each coil is two ohms). You'll just run one channell to one coil and the other channell to the other coil. Your amp will run alot cooler than at the 1 ohm, and you'll be 310 watts over the 4 ohm setup. Might want to check and make sure those...

haha 410 funny, I did'nt think it would fit guess I was proved wrong. Very suprised though!

They look fine to me, mine came with alittle pocket underneath that holds a pack of cigarettes well :) Check out crutchield.com and the website can tell you exactly what you have.

Like kelly said, we need to know what kind of sub you have. You could have a kicker dual voice coil 2 ohms each or a 2 ohm sub. Theoretically everytime you half the ohms you double your power. Examples 100 x 4ohm 200 x 2ohms and 400 x 1ohms. So if you hook up a 2 ohm sub you'll get 200 watts...

OK I think your antenae cable is not hooked up, unless things changed for the 97 from my 96 the preamp should have nothing to do with the radio, that is simply bypassing the factory amp. There is a separate plug running from the antenae that plugs directly into the back of the radio, it kind of...

I would go the line level converter, if you just want cheap for now, your best bet would be one of the bass tubes.

Your not refering to your engine gauge are you as in the speedo cluster?

Ok a few questions about your setup. It sounds like you have multiple amps, correct? Is this the only amp having this problem? How are your amps setup (are they sharing a ground, are they sharing a remote turn on wire, are they sharing a power cable). Also you may want to check your speaker...

OK still trying to decipher all that :) 1) Are you saying to your antenna is not hooked up to your radio? It is possible while changning out your cd player that the wire just fell behind something, I would try and trace it from the actuall antenae itself because I'm sure its there, if not...

If you already have all the equipment needed to hookup the cd changer I would go that route. Another option would be to burn your cd's onto cdr (not cdrw), a store bought cd is a cdr, only downside is once you burn something thats it no changing it. If you do decide to buy a new cd player, get...

I think you are talking about a major modification, that I doubt many here have done. You would probably have to refigure your entire center console (ac/heat controls). Are you trying to install a cd player or dvd player with flipout screen?

haha canda has some cool towns, squamish and whistler :)

I remember checkin out those links alongggg time ago. Basically you need to removeyour gauge cluster and all of its atachements (needles, plastic covering) and scan it on a regular scanner (save alot of time if one person scans theres and then post it). Then with whatever picture you want, you...

Well I'll say this doubling your surface area (2 12's vs 1 12) or doubling your power (100 rms to 200 rms) will only give you a 3db increase in sound. I'd go for the 12's personally will hit alot harder and almost as low as the fifteen. If you listen to alot of rock type music I'd go with 12's...

A fifteen might not hit as hard as some of your tens and twelves but it will hit lower. But I prefer twelves as you get alittle of each. But if its a fifteen you want the kicker is a good bet.

I have a mtx thunderform on my type-R and it hits pretty good, I think I'm only pumping like 375 rms to it though.

ahh had a filter on it :) that was what I was going to reccomend and check