Search results

mine isa '93 Expl, Eddie-Bauer... all I got with it was one-dup-key... I saw a post about 'setting a rmt-fob' with a connector near/in the rear jack/washer compartment... I see no such connector... 1. how can I confirm that I have the remote feature ? 2. how can I confirm that it...

Great minds think alike... :D I was at my neighborhood HDW store today and wondering thru the isle for 'Nuts', screws, bolts, washers..etc and saw a few such "bumpers", one was labeled 'Bumber, Ford' ... $1.79 and looked like what I remembered. Well, I was way off... I got one...

does this mean that the 1/2" pipe will work on the 4-doors ? instead of a bushing... ? I'm not familiar with what "bendable red" is... can you give some more detail? I'm sure the plastic-bushing will not last forever... D'oh the originals didn't. thanks.

Found-It ! :p: Thank-you "C_C", it was far Under the fuse box... as if it had been hidden on purpose... Took a while to wiggle the cover off... and blow-out the cob-webs from the contacts... It has likely never been used. now, to see if I can find a 'Paper-Clip' ... :D...

thanks for catching that, my mistake... /toyfj40

found this (with details of the various method of reading codes). ... post #34... http://www.truckforum.org/forums/ford-truck-forum/23585-1995-bronco-purchase-4.html Does this photo show the Master-Brake-Cylinder ?? (yes, it indicates it is on a Bronco )... I'll look closer and...

Thanks... there was 'something' just to the outside of the radiator that looked "suspicious", but I was not expected it to be there.. And it definitely had no 'label' or ID, but was an "end" of the cable. I'll look tomorrow.

EDIT: solutions. OBD-1 port was UNDER the back end of the FuseBox. my rough/cold idle was a old/leaking "rubber cap" (aka Vacuum Leak) from a bad vacuum-cap on one of the tubes immediately above the PCV-valve. so, a 0.25 rubber cap has me running normal... ---original post: I...

I made some expen$ive progress today... I'll try to summarize. I'm new to PhotoBucket, this should be 7 images... http://s1136.photobucket.com/albums/n493/ExplorePix/StrikerBolt/ prior comments have been helpful, thanks. Dorman Kit #38424, $4 at AutoZone/OReillys...

Thanks for the feedback. I just got them this afternoon. The "schematic/drawing" at the counter appeared to apply to doors (also). I will double-check before I open the package... and post an update in a couple days... edit: the Bulk option certainly is a better price / 0.20 each instead of $1

while at OReillyAuto, I found Dorman#38424 'striker bolt bushing kit' it is four of the plastic bushings ($4) that go ON the door-frame-stud where the door latch catches... now, maybe I can get a tighter door !! Mine were all gone, I had no idea the bushings existed until a friend mentioned...

thanks for the confirmation of cleaning/lubing the channels. I just bought a can of CRC-spray-lithium grease today for use this weekend. "Bending that cover..." ?? if you are referring to the image at the start of this sticky-thread... ie...

I have a '93 Explorer/Eddie Bauer. Both back-seat window motors/regulators are giving trouble (being winter, they will just stay UP ). I noticed ( 1Aauto ) has front/rear left/right MANUAL regulators for about $65 each. Will these replace the motorized-regulators? attach to the...

I've been reading for a couple weeks... I'm in awe of many of your projects. A long-time mechanic friend in FtWorth has a 93-explorer Eddie Bower with 96K miles and a blown auto-transmission, ratty-front seats and needs a paint job as the top and hood are oxidized, but not yet rusty...