Search results

Thanks for the info. Looks like the tank is coming out for a seal job.

Does anyone know if there is a gasket for the top of the gas tank lock ring where the fuel pump installs? I have a slight sweat of a fuel leak at the top of the tank. I don't really want to buy a whole new expensive fuel pump just for a gasket. If its not a bad gasket, then any ideas what it...

It will go WOT with this spacer for sure.

What does your current 2" lift consist of? Are you a 2wd or 4wd? With what you have described, you should be perfectly fine. Im running a 2wd ST with a very nice Camburg 6.0 kit. This kit consists of new spindles,new upper arms, longer shocks for the front. Plus you need to adjust the T-bars...

I have an 02 Sport-Trac 2wd, 6" Camburg lift,4.10 gear, 285/75/16 Tire. 4.0sohc motor, 70k miles, headers & larger single exhaust throughout. K/N CAI. I have a 1" or 1.5" tb spacer for it. It has not been installed. In truth, this rig should have a 4.56 gear. But Im stuck with the 4.10's for...

I have an 02 Sport-Trac 2wd, 6" Camburg lift,4.10 gear, 285/75/16 Tire. 4.0sohc motor, 70k miles, headers & larger single exhaust throughout. K/N CAI. I have a 1" or 1.5" tb spacer for it. It has not been installed. In truth, this rig should have a 4.56 gear. But Im stuck with the 4.10's for...

I would love to post up pics. I need assistance in doing so. I lightly snooped around in here looking for guidance. No luck as of yet! As for the rear end; today, spent a little time cleaning up hardware, getting the e-brakes and rotors prepped. Purchased new U-bolts along with all new bolts...

This issue is a few months old. It only pops up when Im flyin off road, and that's when I think," oh ****, I gotta fix this thing!" Something changed, I just cant think what or when. I did just yesterday notice the smallest little "sweat" type of brake fluid on the l/f hard brake line. That...

:D Finally found a rear end. I have been scouting my local wrecking yard for some time seeking out the ideal donor. I found a clean low miles 8.8 31spline rear axle assembly complete from rotor to rotor. The donor vehicle was a 2000 Explorer. I wanted 4.10's, l/s, disc brakes and both rear...

Dumb question. how does a fella upload pics in here? I want to share my rig with all these awesome rigs in here.

Ok gang, what are some symptoms of my brake booster getting ready to head south? Or vacuum system diag assistance needed. Here is what im experiencing; If I drive on or off road in a spirited manner, and use the two foot braking/driving method, my brake pedal becomes hard under initial...

Headin out this weekend in search of an 8.8 with 4.10's and 31 splines. Does anyone have an idea what the difference in RPM's from a 3.73 to the 4.10's might be? Also while out, going for a complete rear end swap. Upgrading for a few goodies. When complete, I will be selling my rear end...

:popcorn:

:burnout:

My ST is a 2wd, and is a one piece unit. I cant speak for the 4x4's.

I deleted my post!

:frospecta

Dude, I call total Bullshit on your 70w race motor oil!!! I happen to know what Cup and Nationwide cars are using for Qual, and Race day. Unless your Indy Lights cars have clearances like old school 1960 motors, you would have to prove to me those Indy Lights ran that heavy of an oil! Until you...

:crazy:

:DAHHHHH, FIND, you are the man! Gee, I guess in my case, I hadn't had enough coffee this morning before I didn't read the full post. Thus allowing me to make an uneducated guess. Ok, Mr. Indy Lights Engineer. Let me throw this out there and see how it gets translated. Being an engineer...

:popcorn:Sign me up for a copy of the video too! This oughta be good. If you plan on overfilling your motor past the full level, then prepare to purchase connecting rods and a host of other internals. Ponder this thought during your "cleaning" process. While all this magical internal cleaning...

Nice! Colorado Springs is where I want to retire. There are a lot of awesome wheelin spots around there. Have fun and be safe!

What is CCR, aside from the great band Credence Clearwater Revival? Im kinda in prep mode myself. Getting ready to pick a complete rear end from a boneyard, springs and all. My 02 ST has drums in the rear, the wrong gear,and the front eyelet bushings of the rear springs are gone. So for just a...

Hey gang, its TOOOOOOOLTIIIIME! Was surfing around when suddenly the smell of beeeeer pointed me to this here deal. Im in Vegas, I like to go fast in my 02 2wd sort of pre-runner project. When its time to head up in elevation, I hop in my Toyota 4-Runner with the few mods on it, point and shoot...

Russell, and Dakota thanks for your replies. I do not remove the abs relays, fuses ect. I know for sure my issue is not the abs. I have been a professional driving coach in many types of vehicles for 20years. Driving fast in anything with abs takes some getting use to. We would spend a lot of...