Search results

This night my headlights and turn signals started flickering and wouldnt stop until I turned them off completely and if I put on the parking lamps the headlights wouldnt come on if i pulled the knob OR the headlights would come on and my parking lamps and dash lights would go out? Anyone have...

I am wondering what I need to do exactly about the factory stuff if i'm going to be running the 4 door speakers and my box from amps and i'm getting the signal from the HU. Can I just snip the wires and rip out the factory amps? Both amps are receivng the signal via RCAS so the HU won't be...

I want to know if the gauges are the same on the 93-97 rangers are the same as the gauges on the 91-94 explorers. Thanks.

Hello I know some of you out there are using these and I don't know if I need that variable load flasher or what, I went to checker auto parts and they looked at me like I was retarded when I asked for a variable load flasher but I know that someone didn't just make that up so what will the...

Hi All thanks for looking at my post, i'm having a problem with my headlight knob. I Pull it out all the way and only my headlights come on. push it in a little bit and the parking lights and my tail lights come on.....i try playing with it to find somewhere in the middle where both will come...

Whats up i'm posting this here cause this seems like the place where most people would know about this subject I was thinking of putting screens in my headrests but I don't have headrests? I have bucket seats in front but its all one piece no headrest but anyway I know you can put screens in...

I am going to put rear bucket seats and the console in the rear of my explorer. I need to find some seats there are quite a bit of junkyards around here with seats but I wanted to get your guys opinions on how much it'd be worth getting them from a wrecks ex. I would need the seats and all the...

I want to have 4 bucket seats and swap out the rear bench. I already have 2 matching consoles and I want to replace the seats in the front with something better and i'll move the current ones to the back. Thing is I have the impossible-to-find anything for red interior so I will be getting seat...

I was sitting behind my X today and I started to notice how ugly and pointless the rear wiper on the tailgate looks. Is there anyway to shave it or remove it or something?

I have a 91 XLT with the rear bench seat, I want to put the same set up in front in the bad the 2 bucket seats and the console, once all that is acquired how would I mount the seats and console, etc? Any info on this would be greatly appreciated, thanks.

My 91 xlt has been reving up to about 2000 rpm when I put it in park, or even neutral. If I put it in reverse or driver and drops back down to 900-1000 (normal). It started about 2 weeks ago, I had been running 91 octance and I thought it might of been that. So this week and last week i've been...

My brake light and turn signal in the front and back on the drivers side is not working. When I put them on it doesn't even come up blinking on the instrument panel, the passenger side it fine. Any idea's what it could be?

Hey, I need to replace my drivers side clear reflective light....the one that actually serves no purpose and is there for looks. I cracked mine and I am looking if someone has one they would get rid of or knows anywhere I could get one? I just need only the reflective one, thanks.

What is the easiest way to get the speaker wires to the door speakers from the amp??? I'm really only looking how to for the front door speakers

I want to lower my front end about an inch or so? Is this possible using the torsion twist? If so could someone post the link on how to do the torsion twist? Thanks

http://www.cartunes.com/installs/92explorer/explorer.htm I love the way the subs are in the back....

I'm trying to figure out what to put in the back doors, in teh front I have 6 1/2 pioneer 3-ways and they are great, but I want your guys advice since your da pros

What type of tires is there for 17" rims? I do not want low profiles at all? any suggestions? I want an all-terrain

Can the lens part be replaced? I'm talking about just the clear plastic part, what you actually look at, because I got clear in the front of my truck now and the headlights look really really old hehehe so can I just replace them or something?

I need new shocks, my truck is a daily driver, no lift, occasional offroading, i'm looking for a comfortable ride, any recommendations on shocks? I was thinking the RS5000's but there is so many please give me your experience with shocks and your advice thanks

Hey guys check out this street explorer, are those 20's? http://www.godfathercustoms.com/images/shows/botb2000/botb020.jpg this one too : http://www.godfathercustoms.com/images/shows/botb2000/botb045.jpg [Edited by newbz on 12-12-2000 at 01:55 PM]

Hey, when I get my lift I really want to run 35" tires but I noticed a lot of people prefer 33's how come? 35's should fit witha 6" lift right/

Whats up...well today I seen my first really lifted explorer here in town and it was awesome! So now I really want to get a lift so i'm contemplating selling my laptop and other toys....but I was wondering what lift I should go with....I want atleast 5 inches and I want to run 33's or...

Sup everyone....alright I recently took out the front door factory speakers and replaced them with Pioneer TS-A1666 Coaxial Three-way 6 1/2 inch speakers......they sound AWESOME. One of my questions is now, what should I replace the rear door speakers with? I was thinking anything from a 4 inch...

Hi, I am looking for a BRAND name amp....around 500 watts....that is two channel......so 250 x 2.....maybe 600.....ie 300 x 2......this will be driving a pair of 12" bass tubes....I am looking for an amp for around 200 bucks or so if possible....I was hoping maybe if you guys knew some places on...