Search results

I found and Bought an 98 Explorer Sport out of North Carolina What Will be Involved in putting my 99 5.0 Setup in it? Will it Basically Change the Frame Engine Mounts and the Wiring Harness? Or are there Wiring differences :) Thanks in Advance

Thanks Delexplorer :)

I've been searching around on here and haven't Found out if I can Put my 1999 Explorer 5.0 Stuff in a Nicer Rust Free 2002 Sport 4.0 Explorer. Please redirect me or help me out before I buy something that won't Work :) Thanks

I found a nice 2002 explorer sport,Can I transfer all mr 99 5.0 explorer stuff over I it? Plesae Let me know if it will work,Thanks Wayno

My 99 Explorer has some Rust Issues underneath and I was unable to Score the rust free Explorer 4x4 Sport :) So I have a 1994 Ford Ranger thats really Solid with 1977 Bronco 4:11 running gear under it And it had a 5.0 engine in it with a C-4 and dana 20 transfer. I'd like to have the over drive...

Any one Convertered a 1994 Ranger using a Later 5.0 explorer Engine and Tranny? I have a Nice Rust free 1994 Ranger With 1977 Bronco Frt and rear under it and it had a 5.0 in it With a C-4 and Dana 20 with 4:11 gears. I'm wondering if I can use the Processor and Engine With the Aode Trans in...

Hey Dono,Where did the Pictures go? Any Who I pulled my Short block,Tranny and Converter out Today and didn't even Have Open up the A/C :) I was really Impressed with the Heads and took them to the Machine Shop to have a Competition Valve Job done on them and Magna Fluxed to check for cracks and...

Thanks Dano :) for awnsering the EGR Question, I may go with the Tuner set up to get the Most out of My Exploder :) Wayno

Gt 40 Springs New FMS with inside dampner on Ebay for 49.95 a set of 16 new Shipped,I bought 2 sets :) Part #M-6513-A50 Ford Racing

Dono Stepped Up and I'm sending my Pics to Him And the Tube Dia. is Actually 1 5/8, Not 1 3/4 :)

The Divers Side Fit Like a Dream With a 1/2 cut off the rear engine mount Top Plate :) and I'll have to do something about the Pass side,It fits but exits a little Shortl, I can Fix That by cutting a slice in the collecter and heating and Pulling it back and Weld a Piece back in that and the X...

Thanks Ranger X For Helping me out. I'm not too Computer Savy being 59 Years Young, But I really Do apprecieate You Helpin me out :) And as soon as Some Money Has Cleared my Paypal from Selling and Building a 31 Spline 9 In for a Craislist Guy, I'll become a Member:)

I have a 99 5.0 Explorer that I am currently redoin and I'm from Wv and it has the Typical Wv Salty road rust Issues and I'm wondering what can I or Which Other Ranger, Sport Trac, or Exploroer Sport that I can transfer my 99 stuff into . I'd Like to find a Rust Free Project to start with with...

Thanks Ranger X , I went to that Link and with out being a Member I can't upload pics from my Computer that I've Taken from my Camera on my Project. Change my Post or Title if you'd Like :) And If I get more Responses maybe, I'll Join the Elite Thing :) Or just figure it out as I go, Thats...

Can non Elite Members Post Pics?

Thanks Man, I picked these Headers up While in Va Trading Ford Parts With Another Ford Head and He Told me they were off of a Lightnin P/U 351W,I didn't ask what Year cause I pretty much Got them, The Gaskets and Collectors for less than 50.00 the way we traded. I have a 12,600 sg ft Building...

I've been reading the Forums and Calming Down on my Ideas a Bit :) I'll Start with the Gearing 4:10 and then add Free Flowing 2 1/2 Exhaust and 1 3/4 Headers that I have off of a Lighting FMS Stainless Which I will Modify in House. And I'll bend and build an X pipe or H in the Exhaust with the...

Thanks Ranger X I'm new here and it probally shows :) Thanks for your Support :) I'd like to know if I can eliminate my Egr Valve on the 2nd Gen 5.0 Exploder

I throwed that 1 3/4 Lightnin Header right on the Passenger Side with out removing the Stock Exhaust Manifold and Exhaust measuring and markin where the Oem O2's go back :) Plus I took the Rubber Inner Fender out too not the Plasytic. All I need to do now is Wedge cut the Exhaust Mounting Flange...

After pullin the Inner Fenders and tearing the Top End Down,I see all kinds of areas to make room for Headers Move the Steering Shaft like a Race car with a Rack Via steering ujoints and a Hiems mounted to the top of the Shock Tower and trim the excess off of the Engine Steel mounting Plate with...

After looking at these Gt 40 Heads,I think I'll recondition them and Mill them .030 ths to start with, And give them a Port Match and unshroud the Valves and Blend the Bowls a Little, use the E303 cam and Save the Mustang Engine for Something Else :) Can I eliminate the Egr Valve set up?

I'm new here and Hope I'm posting in the Right area :) I have a 1999 5.0 Explorer A/T 4x4 with a Tired Engine and My Son Gave me a 92 rebuilt 5.0 out of his Lx Mustang,165 Afr heads new Ford Racing F Cam advanced 4 degrees, (And I have a E303 he use to run) plus Windage tray, Eldlebrock older...

New Here And I Bleed Ford Blue o