Search results

The first thing I did after buying my Explorer was to find a community where I could learn about my Explorer, read thru posts and find advice. I sincerely thank my fellow members for their help and advice. You’re a great group of people! I bought a $3200, ‘99 4WD Pathfinder, 126,821 mi, solid...

I had my ‘94 Explorer 17 yrs. In that time I was blessed with an 85% run time and repairs cost under $5K. She has been a blessing to me. During the last 8 yrs my Ex developed issues that I couldn’t fix and couldn’t justify paying $120/hr labor. I shopped 10 mos for an SUV, finally got...

Makes perfect sense. I have ADHD and my brain just isn’t satisfied til it makes sense.

Thanks for your replies allmyexes and roadrunner777. I called a shop my daughter takes her newer Subaru to. He wanted right around $700 and 2.5 days to change all brakes and replace both front calipers. I saw this Brakes 4 Less ad and on Wed. ya get an add’l 15% off! I’m going with the $309 pkg...

Hey y’all. My SUV is a 94 Ex XLT 4.0L OHC 2WD 4DR 300,391 mi. The following symptoms presented on 3 occasions between May and Aug 2019 on roads with speed limits of 55 mph and under. steering pulls to the left; shakes some steering wheel drives 15° rt of center won’t shift into 4th gear...

Got my ‘94 Ex in ‘04 w/221322 mi. 080719 odometer reading: 301,319! Put about $4k into repairs over the yrs. She’s been such a blessing.

Feeling Grateful! I haven't had to invest much money in repairs since I bought her in '04. She runs pretty good w/2999675 mi.

Those symptoms point to a frozen caliper right? and yet upon inspection today brake fluids full; none leaking on the tire (I had a froz caliper yrs ago on a Pontiac). My neighbor, THANK YOU TOM, came over and checked the obvious. What he found was a broken vacuum line to a part I can't identify...

This is an old post but helpful to me- Thanks MONMIX! An installed spare on my right front lost its retread on an interstate & took my right front rocker panel molding with it. Now I know what I'm looking for & how to install it. If I find one at the boneyard, how do I pull a panel off...

Thank you I needed this! I'll get onn it next week :thumbsup:

I was unable to thank Espresso by replying to his 2005 post for the pictures and details I need to change my ignition lock. I thank you here!!! Excellent job. :thumbsup: :thumbsup: :thumbsup: Glad I found it in search here. Here's the link if anyone needs it...

Some basic information is overlooked for newbies like me. Hope this helps someone else not waste hours trying to figure this stuff out. I didn't know how to remove the plastic rivets that hold the carpet in place under the dash! Finally found out: Grab the head with a pair of pliars, I used...

hi, I bought an EEC tester - got a few codes: KOEO hard code 565 (saw in here I should have the canister purge circuit tested) KOEO stored: 327 (EGR valve position sensor, Pressure Feedback EGR sensor OR EGR Pressure Transducer - signal voltage too low) KOEO stored: 337 (same as above only...

MANY THANKS for the instruction. was quoted $400 for a 4 hr job to replace this! dang!!!! I was gonna cap off the lines but have decided to replace the core as advance auto has it for $21.88 in daytona beach!

hi ya'll. I wanted to show my gratitude for this site by signing up for the elite ex club! The $20 yearly fee was a pittance compared to the $$ saved on my transmission problem. I've had my ex for 2 yrs. Never quite felt right during acceleration and problems got worse over the years I...

a speed sensor replacement on my '94 2WD fixed my bouncing speedo...

Hi ya'll. I'm plugging away with 208k mi on my 2WD 94 XLT. Pleased as all get out she's getting 18mpg mostly hwy cos I travel & gas prices??? Getting her in the tranny shop next week to find and fix a slow leak. Is there anything else that oughtta be done at the same time. Someone suggested...

200,036 Months ago brake lights were fixed, hatch was repaired, brake work done, front end shook cos of tires. Bought 4 base tires from SAMS club. More recently an heated O2 sensor & temp sensor were changed out. Replaced the bearing in the idler pulley (didnt like the rimless...

thanks glacier, I'll look for that diagnosis in his phone call. He cleared all codes last week. Mostly emmissions codes. No TCC...

hey. I stopped at a red light the other day, on a bit of an incline, and the truck rolled backward :eek: till I hit the brake. She carried on as normal the rest of my trip. At times, during accelerating on the hiway, I see the rpm's climb to 2600 at about 55mph before shifting into gear...

about noise... I bought my truck with a hood deflector attached but the corner was cracked. I took it off after 2 weeks cos it impeded my hood opening. I didnt realize it helped deaden the noise till it was gone. I have to get another one! I did put on window vent shades and they help some.

I oughtta clarify that MCTOY is male... my bad!

1st gen idler pulley bearing I bought a pulley so NAPA could match the bearing diameter. the bearing is P/N 6203-2RSJ I will return the pulley tomorrow. I did not like the design of the replacement.

i found it I found the bearing by going into NAPA. NAPA on-line didn't show it. It was $10. How many years ago did oyu pay $3.50 for it?? I tapped it in today and installed the pulley; backwards LOL. I didn't get to see it installed and it does fit both ways. The pulley was too close to...