Search results

Damn, was hoping it turned on the turbo or something

Was doing some tune up stuff and noticed this piece hanging. It’s had to have been off for awhile now because I don’t ever remember seeing it before. What does it do and where does it go? It doesn’t really seem to have a place that the wires can stretch to.

So I have the 4406 swap. Now after a few years the rear seal is leaking. Nothing major, slight drips, just want it fixed. I'm not really sure what the tcase came out of and I think the driveshaft was out of an Expedition. I can look up a mid 90's F-150 or 250s and find a 4406 seal but there are...

Chasing down a gremlin. Had to replace the radiator the other day. Had a leak. Didn't over heat was just leaking. Went to start it up and it was running rough. Like a miss/vacuum leak. I had to take off the intake tube to get the radiator in and out so I assumed I left something unplugged. Shut...

We have been trying to think of a name for about a year now and nothing just seems to fit right. I guess when the time comes it will be named.

Some 2020 quarantine trips

Along the way

The beginning of the makeover. The bumper RockRanger makes hasn't fallen off yet!!!

Ill try and look for the box if it hasn't been tossed yet. It wasn't a name brand off Amazon that currently isn't being sold anymore if that tells you anything. And all I can say is tight. I don't have a 3/4 torque wrench and all I have is a 3/4 inch socket.

Everyone had a good laugh the day this backed into the driveway

Well it turns out it was a hub bearing..... how I have no idea. It had to be a bad one from the start because I replaced them when I did the 4406 swap. Replace the front CVs. My fault I cut a boot cutting off the rusted end links. All new poly front end. Upper and lower control arms. Had the...

Sorry I was defiantly just kidding.... my bad. I just really hate the parking brake on this thing.

So stop trying to drift the Ex?

Is this the same procedure used for the parking brake? Cause it doesn't really hold in the driveway, I don't know how long it would take to slow down from 60, 7-8 times. I do smell burning brakes when I leave it on sometimes.

Doesn't having a dual inlet muffler kinda do the same thing as an X pipe?

I used my factory fog light wiring and switch. The wiring is already there. The switch is already in place and looks clean. There is a mod on here you can do that keeps the fog lights on when the high beams are on. So my spot lights can be turned off and on when on the highway and not, and they...

Nevermind I missed the first post.

Maybe someone can chime in here.. I would have to double check but the part number for the Power Trax front locker for us is the same part number for the Power Trax rear locker for a Dana 35 Jeep. What gives with not being able to use another locker from a Jeep?

I do the same thing. Mostly for friends family and neighbors. Especially now that everyone is off work. When you tell someone you can put a 60 dollar CV in 45 minute in their driveway vs leaving it at a mechanic and finding a ride for 3 days and they come back with 2 or 3 quotes for 5 or 6...

I have a Power Trax up front and tow with it. Unless you really need a front locker where you will be going I can tell you there are really more cons than pros. Yes it is the cheapest option, probably the easiest to install, and in the end you are locked up front. I would never have one on a DD...

Going to have them rebalanced just to check it off the list. I think I can see where a weight came off but that could just be me wanting it to be lol I’m not a tire expert but to me it just doesn’t make sense about it wearing because it was like it happened almost immediately. But that could be...

Good afternoon, Took a trip recently to the beach. It was about 300 miles there. Spent the day driving on the beach in HI 4WD. 4406. Nothing hard, no getting stuck no deep water crossings. I didn't even get the tires wet actually. I did air down to about 16 PSI because the sand was dry. Other...

I mounted a 13.5 on mine. Gift card for Christmas, free trial of Amazon Prime with for 30 bucks off shipping, and that’s what I ended up with. No problem really with clearance on the sides but the grill to fairlead Mount was tight!!! Holes lined right up. I thought it was going to be a pain to...

Well the .29 is the reading after sitting for an hour and half so that should be when everything went to sleep. If .29 is 290mA and it dropped to .01 shouldn’t that be a drop of over .280 mA? Sorry electrics isn’t my thing just trying to follow instructions. without being technical I guess I...

Well it’s time to start digging into this problem again. So assuming I have the meter hooked up correctly on the negative battery terminal this is the reading after letting the vehicle sit for an hour and a half. Yes the meter was hooked up the entire time. Pulled fuse 6 under the hood...