Search results

Bosch are the best

Good stuff bro

You'll feel a little coming through the steering wheel, nothing bad at all.

I've ran just the bar, bar on H&Rs, and bar on H&Rs with Bilstein B6s. My recommendation: Stock springs and struts, middle setting. Upgraded springs only, middle setting. Springs and Bilsteins, max setting.

Remove the garbage "tune" and you should be fine

275/45/20 on stock sport 9" wide wheels works just fine.

Justin (MTM) is a legit seller, and the GH tune he sells is one of the best (if not the best) around

Follow that 2nd YouTube video mguy13sport posted.

You can do it without taking the entire assembly apart, I did.

Considering they're built on 2 totally different chassis, I doubt it.

Strange, mine didn't have the "frame side" mount, only the mounts on the trans itself.

Yes. We only have a single mount, the rear-most one (2018 owner also)

Unbolt the 3 bolts, then the running board will need to be pushed up toward the body slightly and will dislodge

I'm on the edge, just the brake line concerns me (don't want to have to source all the parts myself) as I know the SHO one won't fit our Exp.

https://www.schwartzep.com/big-brake-adapter-brackets

Ya, i meant Aaron's kit, should have mentioned it beforehand. We've treaded a bunch of messages on the SHO page, but he was unsure if the line he provided would fit. I'm coming up on needing a brake job so I was looking into his kit as an option, so I'm guessing I'd need that adaptor or...

You see the Wilwood bolt on front kit sold on the SHO FB forum? Any thoughts about that?

Good **** brother

Off hand, do you know if this IC will direct install to the EPP dual intake and hot pipes, or are extra parts needed?

I sent Nick a message on IG just now.

Some good stuff right there bro

Matt had told me December-ish for the IC last time we talked. End of summer would be much better of course lol

No worries. I would recommend a 200 microfarad (iirc) one to cap the low bass to the woofer. At least i know the crossovers aren't inside the amp

Funny the rear doors didn't have caps, good way to blow the woofers on them. I would imagine the front doors had caps too, but I'll look for more into on them Thanks for the reply

The Bilsteins finally came back in stock about a month ago, but seem to be out of stock again. I ordered mine last year August and got them installed in June. I don't know what you can expect if you use the B6s with stock springs (you didn't mention if they were stock or aftermarket), as the...