Search results | Ford Explorer Forums - Serious Explorations

  • Register Today It's free!

Search results

  1. K

    Adding rear hvac . How involved??

    Ok so I have a body shop and tend to pull multiple cars apart this is how I accomplished it on my personal vehicle. You need the hvac unit. The under car a/c and under car coolant lines. The ac line off the evaporator from one that has rear hvac and a different heater core cross over hose which...
  2. K

    Adding rear hvac . How involved??

    I am still around! Not as Much as I used to as I tend to follow rhe Facebook pages more and try and help there..
  3. K

    Adding rear hvac . How involved??

    Worked out just fine. Once it was wired in and the values changed in the module I had issues trying to run a sync 2 Raido setup which I was trying to do all at the same time causing issues. But using my factory 4in screen and bezel it functioned propperly
  4. K

    Terrain Management Addition? Canbus connection needed

    What gauge cluster do you have. If it's a piu cluster it will not show the terrain management the firmware is different from a base ipc1 and ipc2.
  5. K

    2013 Seats in a 2011?

    Yes it will. , What color seats do you have ? Looking to switch my split for captains chairs
  6. K

    Terrain Management Addition? Canbus connection needed

    Honestly the cluster is plug and play . Only thing that may need changed in it is if your vehicle is awd and remote start options .( My cluster was from a fwd) I never cared to have the awd gauge turned on. As for center console shifter that's an easy task to accomplish aswell. You stated the...
  7. K

    Terrain Management Addition? Canbus connection needed

    Do you have the as built from a sport on hand? That's what I would reference if not shoot me a message I can pull them up
  8. K

    Terrain Management Addition? Canbus connection needed

    If your battery gets too low it will trigger the advanced trac / abs light when initially started . It can also trigger the srs /airbag. Once you started it it probably went above that 11v trigger and obviously went away
  9. K

    2013 Ford Police Interceptor Utility (Front End Popping/Clunking)

    From the outside look and with the mileage guarantee they never would expect bushings I know I didn't with the mileage on mine. Once taking them off they were very worn on the inside almost egg shaped
  10. K

    Terrain Management Addition? Canbus connection needed

    I was told in the past it wouldn't work in general ( terrain management) because it wasnt programmed in the pcm. But I was also told you could not add auto headlamps and rear HVAC in which I successfully did. I have had both a base 4wd and my inecteceptor. From my base I know when you turn the...
  11. K

    Terrain Management Addition? Canbus connection needed

    Any update? The two things I want to finish enabeling in mine is terrain management and shift up and down for center console. It's literally the only 2 things I have not gotten to work on mine
  12. K

    2013 Ford Police Interceptor Utility (Front End Popping/Clunking)

    That's exactly what my 15 was doing I changed everything up front . Control arms. Struts. Sway bar links.... It ended up being the damn sway bar bushings themselves. Bit of a pain to change with only 60k miles on it I highly doubted they were bad and it was a link or control arm. Nope sway bar...
  13. K

    Partial seat swap PIU to Base

    Just find a set of piu seats and install them you can pick them up cheap probably from a few members on here who. Have swapped out for regular model leather seats. I know I did I junked my piu seats as soon as I got mine
  14. K

    20x11 +35 wheels on 2019 Sport

    I'm running 20x10.5 32+ offset looks and fits great . Only concern with. 20x11 +25 offset would be the tires sticking out of the wheel wells mine sit damn near flush with my setup and everyone said it was too positive of an offset compared to factory. Haven't had an issue they look great and...
  15. K

    Rear exhaust manifold replacement

    Took me about an hour and a half maybe and I didn't have a clue how it was in there I dropped it out thru the bottom it doesn't look like it will fit but it does with a little turning and twisting
  16. K

    ball joint part number

    It's not serviceable have to change the whole arm. They're not too bad on eBay
  17. K

    Rear exhaust manifold replacement

    It's not too hard did it on my wife's 15. I believe it was 8 13mm nuts. Easiest way was jacking it up high unbolt both exhaust flanges drop exhaust some and reach up from the bottom you can actually reach each bolt ... Only reason I did mine was the dealer wanted to charge me 2k to do it if. It...
  18. K

    complete XLT interior fitting. Is it Possible?

    No the latch bars are definitely bolted on outer ones are 2 13mm bolts and the inner ones are 2 15 mm bolts
  19. K

    complete XLT interior fitting. Is it Possible?

    Yep you should be in luck here is a link to the how to on the fusion forums the guys on there are super helpful. Ford Sync 2 (MFT) and Sync 3 - Upgrade / Convert 4" to 8" Center Display There's a page of the pinouts you can see what needs changed
  20. K

    complete XLT interior fitting. Is it Possible?

    Which seat is not working driver or passenger
  21. K

    complete XLT interior fitting. Is it Possible?

    I do but I couldn't tell you where it is lol it's in the garage somewhere,those fuses are all the same I'm actually pretty certain the fuse panel is exact for all models. Just some slots left open.
  22. K

    complete XLT interior fitting. Is it Possible?

    Nope north east Ohio. Seems like not too many explorer people who modify around here either.
  23. K

    complete XLT interior fitting. Is it Possible?

    If it said no phone connected it probably has sync there's a little black box that sits directly under the original 4" screen it has the same plug that the 8" APIM module. That is the one that needs pins moved. There's a few nice write-ups on it. I currently need to do it in my newest explorer...
  24. K

    complete XLT interior fitting. Is it Possible?

    Easy way to find out if it has sync push the phone button on the dash if it has sync it'll say no phone connected.. if it doesn't it'll say vehicle is not equipped with sync. If it has sync there's another module in there a bit lower, and as for the seat check and make sure you have 12v at the...
  25. K

    complete XLT interior fitting. Is it Possible?

    Does your vehicle have sync?? If not the radio is most definitely not an easy swap. If it does you need to go on the f150 or fusion forums and look up 4"-8" mft. Swap there are about 8 pins that need moved around for it to work
Back
Top