Search results | Ford Explorer Forums - Serious Explorations

  • Register Today It's free!

Search results

  1. D

    Anybody think they can handle this difficult solve? Need some 2nd opinions with a crank over but no fire up

    That first thread about the crank no spark is pretty helpful, it actually answered a few of my questions that I had just posted previously lol thx. What else guys lol
  2. D

    Anybody think they can handle this difficult solve? Need some 2nd opinions with a crank over but no fire up

    Technically this is the fifth engine I've had but only the third engine to go into the truck and I'm on my second transmission and third rear axle with LSD, factory axle didn't have LSD. I got a motor from a junkyard that was like the only one I could find that delivered (cuz my truck was down)...
  3. D

    Anybody think they can handle this difficult solve? Need some 2nd opinions with a crank over but no fire up

    You're talking about the engine harness main connector to body harness connector. On my version of the 4.0 sohc that connector is right in front of the coil pack on top of the driver's side valve cover. There are like three or four different intake manifolds for the various cologne 4.0 sohc...
  4. D

    Anybody think they can handle this difficult solve? Need some 2nd opinions with a crank over but no fire up

    Are u talking about the connector right by the metal vent hose tube for the trans, like right on top of the trans bell housing? O na your talking about where the engine harness plugs into the rest of the harness right that 10 mili bolt?
  5. D

    Anybody think they can handle this difficult solve? Need some 2nd opinions with a crank over but no fire up

    From above-"I replaced the cam and crank sensors, i still have to test continuity between the cam and crank sensor connectors and the pcm connector, i also tried another coil pack. The coil pack is getting 12 volts on pin 1 or 4, i forget which one is power and the other 3 pins on the coil pack...
  6. D

    Anybody think they can handle this difficult solve? Need some 2nd opinions with a crank over but no fire up

    I have an Eaton M90 01 XPLR sport 2 dr 4.0 v6 sohc with a crank no fire problem. It turns over but does not fire, inertia switch is fine, pats system is fine and its def reading the keys transponder. The truck was running fine, I came home, parked it, came back to the truck a cpl hrs l8r to...
  7. D

    5R55S swap

    Yeah that 3.7 V6 DOHC that they put in the mustang is pretty good I've seen a guy swap one of those 3.7's into his sport trac and I've even seen a coyote swapped Sport Trac I've given serious thought to swapping a V8 into my two-door Explorer preferably with dohc, along with a t56 6-speed that...
  8. D

    5R55S swap

    What a great write up and the pictures are still there and working to this day awesome. Got a 5r55e with a Borg Warner 1356 in my 01 BoostedXPLR Sport 2dr and was thinkin to myself 5r55s swap and found this thread instantly. Although i would have to get the 4x4 5r55s and it looks like only the...
  9. D

    Balance Shaft myth debunked!!

    wellll, see what happens when you put an engine without a balance shaft ina truck thats suppose to have a balance shaft? It unbalances itself into pieces like a way off center washing machine load roffl. jk
  10. D

    Anybody know where to get an Overdrive crank pulley for the 4.0 SOHC?

    You know where I can find upgraded sway bars? Is that explorer Express sway bar discontinued? Oh and I came up with the idea to go search through my email for a message about getting a bigger crank pulley and finding out who I previously emailed about it, turns out it was ASP who I contacted...
  11. D

    Anybody know where to get an Overdrive crank pulley for the 4.0 SOHC?

    U have coilovers in the front or t bars?
  12. D

    4.0 OHV into 4.0 24v COSWORTH

    Soooo can we get more info on the Cosworth Head swap?
  13. D

    Anybody know where to get an Overdrive crank pulley for the 4.0 SOHC?

    At first I was saying to myself why is he saying 8 rib if he's running a 4.0 and then I even proceeded to count the grooves on the crank pulleys I was working on rofl. But then I realized who you were 347 two-door Sport with a sweet ass paint job lowered right, the gen right before mine. Oh and...
  14. D

    2003 Harmonic Balancer Dust Shield

    Oh and by the way when it comes to all aspects of the timing chain drive system for the 4.0 sohc there is no substitute for official Ford replacement parts for the timing drive. Trust me I've done extensive research on this. I really wish there was a performance timing drive kit for the 4.0 or...
  15. D

    2003 Harmonic Balancer Dust Shield

    Waking this thread up for sure. I'm kind of having the same issue as far as trying to locate one of the crank pulley or harmonic dampener plastic dust shields on the interweb. I could find a differential pinion dust cover no problem, which is essentially the same thing with different...
  16. D

    Anybody know where to get an Overdrive crank pulley for the 4.0 SOHC?

    I'm looking for an overdrive crank pulley for my 01 BoostedXPLR Sport with a 4.0 sohc to spin my Eaton M90 jus a lil faster. Plus I'm always reading about how the crank pulleys on the 4.0s (mostly 05 to 10 v6 mustangs lol) are always falling apart. Thought I spotted one on the web a while ago...
  17. D

    Underdrive/Overdrive Pulleys, New Alternator

    Very true I actually run dual alternators and dual Optimas. My primary alternator is between 200 and 250 amps I forget exactly, and my secondary alternator is a GM ad244 i believe that I purposely bought with low amperage so that I would have good voltage at idle which is important with all the...
  18. D

    Introducing the first Explorer Sport QuadPod

    Yeah I'm happy with the way the engine bay came out, with the dual alternator and dual battery and the custom belt drive setup. I do need to get a performance radiator and ditch the clutch fan and install an electric fan though. But yes I have a lot more pictures what I'll do is I'll make an...
  19. D

    Introducing the first Explorer Sport QuadPod

    Can't wait to grind the snout down and go with some small ones and then after I build a proper performance motor I'll probably switch up to a cobra eaton m112 blower
  20. D

    Introducing the first Explorer Sport QuadPod

    I already installed an oil pressure sensor that's the second gauge up from the bottom. The top gauge I ended up going with does all sorts of stuff, wideband a/f, fuel pressure, intercooler system coolant temperature, voltage, and a whole bunch more. The top gauge hole didn't have a lot of space...
  21. D

    75mm throttle body for 4.0L SOHC?

    This is the throttle body that I have with the metal cable linkage arm. SR perf 75mm for 4.6 sohc Sr perf 75mm TB The one that street rod has pictured above has a plastic arm on the side but after closer inspection it looks like both arms hold the cables the same way for the 4.6 unless I'm...
  22. D

    75mm throttle body for 4.0L SOHC?

    Is the bore of your spacer inlet the same size as your throttle body bore? And is the outlet of your spacer bore the same size as the bore on the intake manifold? And what is the bore diameter of your throttle body?
  23. D

    75mm throttle body for 4.0L SOHC?

    You can definitely add a bypass to the setup probably. I might even try and find a way to vent it to atmosphere if it was me like on a pro charger or a vortec. What brand is the kit you're talking about that you found from an f150 or bronco? And I'm running 7 to 8 lbs of boost right now on my...
  24. D

    4.0 sohc NON TTY cyl head bolt torque specs?

    Im ditchin the factory cyl head stretch bolts for some grade 12 reusables for my supercharged 4.0 sohc and i was wondering if anybody had torque and tightening procedures for non tty grade 12 bolts? ARP head studs were too expensive but if i build a proper motor ill sure get em. I just figure...
Back
Top