Search results

1991 ex 4 door 4.0 v6 5 speed I have been fighting with this problem now for about 2 months i just can't figure it out? When the truck is warm it starts up great, but when it's cold it takes a while to start. the first thing in the morning the truck just keeps turning over intill it starts...

I got a 91 xlt 5 Speed that was have trouble shifting into first and reverse. I have 2 other donor trucks that i use for parts so i ripped the transmission out of one for my install. I got a new slave cylinder(bench bleed it before installing it TRUST ME) so i put it in the donor...

I got a 1991 xlt 5peed 4x4 The transmission started acting up the last month The tranny would'nt go into 1 or R when the truck was stopped only when im rooling to a stop the truck would go into first. I have 2 other parts trucks YES I LIKE EXPLORERS I removed the transmission from my truck...

I changed my Coolant temp sensor a week ago and today the check engine loght came on. I scanned it and code 61 came up (COOLANT TEMP SENSOR CIRCUIT GROUNDED)?? Can anyone tell me what that means and where to look to fix it?

I got a 91 explorer 4x4 v6 4.0 The truck cranks over but takes about 10 seconds to start only when cold? I have changed the fuel pump (pressure is @ 35-40lb,) changed the fuel filter,plugs,wires oil ..etc when the truck is warm it starts ok can anyone tell me how to diagnose this...

I was changing the oil and tuning up the engine when i rub up against the vacuum lines and they broke off from the manifold above the PVC valve there is a set off lines coming off of the throdle body next to the brake boster that crumbled because the plastic was hard. i know one goes to the...

I got a 91 xlt 5 speed V6 The problem that I'm having is when i try to start my truck in the morrning when i turn the key it cranks over of about 2sec then it pauses then cranks for another 2sec then starts. I got a new battery(plus terminals) new battery cable to the starter fuel pump...

I have a 1991 explorer XLT 5 speed. I had my truck idling for about 30 min talkin to friends when it died on me. After changing the relay and fuse nothing.So i went over to my parts truck 92 explorer xlt 5 speed dropped the tank pulled out the pump and swapped it into mine. Now the...

can anyone tell me is the 92 driveshaft will fix on a 91. If so can you tell me what kind of problems i might come accross. 92 xlt 5 speed...to..91 xlt 5 speed also do i have to balance it?

I got a 91 XLT 4.0 5 speed transmission The problem im having is when i shift into gears 1,2,3,4,5 I get a clunking noise from under the truck when i shift up or down. can anyone tell me what this is or what to look for?? I currently have a parts truck that i can strip for parts if...

1 got a 91 XLT 4.0 v6 5 speed i had the truck running for a while warming up When i went to move it it stalled on me I tried to start it but it struggles to stay on can this be my fuel pump and if so how do i check thanx

i got a 91 xlt 5 peed My truck started to rev high with the rpm's @ around 2000 It used to be @ around 650 Can anyone tell me wtf is going on with my truck or what i can do to fix it I already sprayed WD-40 on my throdle assembly but no change. Help thanx

I need some help my trucks tranny went i need a repair manual to rebuild it 91-94 5 speed trannny i need to get this truck back on the road any help would be appriciated thankx :roll:

i have a 1991 explorer 4.0 v6 5 speed manual i cant locate the clutch fluid reserviour can any one help me with this problem i currently having problems shifting into first gear and reverse thank you :)

I got a 91 Explorer xlt 5 speed manual 4.0 v6 I need to replace the transmission Can anyone tell me what trannmissions are compadable for a swap or if a ranger tranny will fit. The tranny right now is sticking when i try to put it in first I have to attemp it 3 time before it enters the...

I got a 91 xlt 5 speed and i currently having troubles shifting into 1st It just doesn't want to go into 1st somtimes I have to really pressure it it Can anyone tell me how to fix this and what to look for thanx

im curently going to replace the radius arm bushing on my 91 X i need to know where to place my jack stands on the frame or under the front suspension

Can anyone give me a step by step on how to replace my radius arm bushings on my 91 explorer. And what i should be looking for thanx

My truck has been parked for 3 years and today i took it out for a spin After about an hour i started to smell burning the front passenger wheel was smoking. I push the 4by4 button on and off to see if the auto hubs where ingaged nothing happened. i jacked the wheel off of the ground...

Hey everyone just finished my truck finally take a look and let me know what you think i need feedback www.claudioscustoms.com

I recently just primed my truck and parked it outside. Like a idiot i parked it under a tree :thumbdwn: The truck is going to paint and i have tree sap all over it :fire: Can anyone tell me how to get it all off can i wash it or do I need to sand it agian

I need to know if i need dolly's to tow my truck I got a 91 XLT 4 by 4

Check out the progress on my XLT www.claudioscustoms.com

I have some concerns about priming my truck I have transformed my garage into a spray both and am going to prime and paint my truck in there. I have to mix the primer 60/40 with paint thinner and am worried about the fume in the garage when i am painting it. Im worried that the florecent...

Can anyone tell me the pros & cons of having tire spacers. How hard are they to install? Will it effect the way the truck handles/drives?