Search results

The roof rack is sold!

I still have them, I have another interested buyer right now, but you would be next in line. I am going to try to get some pics this week.

I have a Surco roof rack with the spare tire mount that I need to sell. Roof rack could use a new coat of paint, little bit faded, but other than that its in great shape. First $50 bucks picked up gets it, not looking to ship, way to big for that. Can get some pics if interested. Also have a...

I finally solved this problem last weekend, after replacing the sensors and getting nothing. Turns out it was the tone rings, I bought a set of drilled and slotted rotors and that fixed it right up. Its weird, I dont see any damage to the old tone rings, but it may be to slight to see.

Well it looks like it is the abs sensors, I ended up pulling the fuses out for the abs and the brakes work perfect just running conventional. So I am going to try cleaning them one more time and go from there.

hmm, i cleaned the sensors and backing plates with simple green, they were coated in dust from the cheapo pads that were on it, hopefully i didnt screw them up. I was careful not to hit the tone rings so hopefully thats not the issue. Is there any way to test the abs sensors?

I know about moisture problems, I plan to change the fluid as soon as I can get some help. I will use a synthetic fluid, worked great in the clutch in the 92. The thing is I have not altered the lines in any way, so how could I get air in the lines? I never bleed a system till after I am sure...

I replaced all my brakes on the '01 Sport a couple weekends ago, went all out. Here is what I replaced: Rear pads with premium Rear antirattle clips Front rotors with new Motorcraft Front pads with premium ceramics Front antirattle clips Front slide pin boots Front bearings with new...

You can use a cheapo electric hand sander on all the flat spots and do the contours by hand, not that hard. I did mine this way a few weeks ago, took about 40 minutes. Another idea is to invest in a angle grinder with a wire wheel on it, I use this as well, works great.

I am eyeing the xspec handling kit for my '01, and am wondering if anyone else is still using this setup? My truck is strictly road use, and am looking to get the slop and wallow out of this thing going around corners. I already replaced the shocks, just gabrail ultra's nothing fancy, and...

thanks for the heads up everyone, looks like a project for this weekend

My '01 Sport has a weird problem, the accelerator cable has a lot of slack in it, I can pick up the cable itself, metal not the casing and pull it up about half a inch before it moves the butterfly or the pedal itself. Inside you can push the pedal about half inch down before there is any...

Get the axle code off of the door sticker, do a search for axle codes and compare to find what kind of carrier you have. If you have a limited slip then you have the synthetic that has additives for the clutches in the limited slip. However if it says you have a open style carrier then you have...

Pm sent

I am not looking to seperate the wheels and tires, too much hassle and I have to pay more money to get them seperated without tearing up the wheels.

Bump! Make me some offers! Could use performance parts for a '01 Sport as well, open to trades. Thanks!

These are the front wheels, with the holes for hubs to stick through. With manual hubs it fits flush to the cap, in other words it does not stick out past the rim face. I am not sure with auto hubs tho, maybe.

Wheel and tire pics...

more pics...

it does not come apart, it is all one peice,except for the head light grill inserts, but i have never taken them out

I am going to take pics this weekend and I will get em posted, I am sorry for the delay. Austin is about 4 hours straight shot down I35 from me, my bro used to live there so I made that trip a few times. You are more than welcome to pick this up, just let me know. Thanks!

I have sold my '92, but kept a few things from it to sell seperatly: First is a set of four like new 32x11.50x15 BFG A/T's mounted on also like new Mickey Thompson black Sidebiter rims 15x8 . These were bought last july, but only around 2k miles on them, never been off pavement, (which is why I...

Same thing was wrong with mine when I bought it, the rubber plugs at the top had leaked all the oil out.

I got the new pin today, put it in and it works like a charm! Hard to believe still that I must have gone two years without backup lights! Anyways thanks Spdrcer34 for your help, I would probably still be scratching my head right now. To celebrate the lights working I also bought a set of...

i did make sure the switch itself is working along with the lights and even the new camera It does not require a ground luckily. I called the dealership, they have the pin i am just wondering if it was missing all along since installing the rebuilt trans or if it somehow has fallen into the...