Search results | Ford Explorer Forums - Serious Explorations

  • Register Today It's free!

Search results

  1. J

    1992 and 1996 explorer compatability

    I just found a 92 explorer for really cheap, I was gonna use it for a parts truck for my 96 is it worth it, are the parts compatible? Just figured I would ask you guys-----Thanks, Jack
  2. J

    Tire questions

    Hi everyone, I have finally found a set of 31x10.5x15 tires for my explorer, the truck is a 96 with a OHV motor, and 3.25 gears. I was just wondering, if putting these tires on my truck is gonna make a dramatic difference in power, I know it will slow me down a little and decrease my fuel...
  3. J

    2005 explorer hub assembly??

    Hi, I was just wondering if changing a front hub assembly on a 05 ex is as easy as doing a 96? I have to do a 05 for a friend and I told him no problem but now I am wondering if they changed things and made it harder to do than my 96 which is a peice of cake to do?? Anyway, thats all I...
  4. J

    04 explorer smoking like crazy!!!!

    Hi everyone. I just picked up a 04 explorer with a 4.0 SOHC and 76k miles on it, the problem I am having is that the truck will barely start unless I play with the gas pedal, then it barely idles and pours white smoke out of the tailpipe, and yes I thought, its a headgasket, but then I smelled...
  5. J

    Found great deal on hub bearings 95-01

    Hey everyone, I havent been on here in a while but I just had a hub bearing go bad on my 96 explorer and I really didnt want to pay 189 bucks for a new timken bearing, so I started poking around the net and found a Timken bearing for 136 plus 8.60 flat rate shipping on ebay. They didnt say if...
  6. J

    Problem with moonroof

    Just recently I noticed a musty smell in the interior of my explorer, the truck sat for about 2 weeks while my wife was on vacation and after that is when I noticed the smell. I was messing aorund trying to find a water leak and I noticed that the fabric on the sunshade of the moonroof was...
  7. J

    Towing my camper?

    Hi everyone, I had a quick question, I am sure similar questions have been covered in this section but I have been searching and I can't seem to find what I need to know. I have a 96 XLT with the 4.0 in it 4wd with 3.55 gears and add a leafs. I just got a new, well not new, but new to me camper...
  8. J

    I don't want 4WD Auto anymore

    Hey, I have a 96 XLT with a 4.0 and i was just wondering if there was a way to make it so that when I switch into 4wd auto, it can actuall be in 4wd High? I notice that the 4wd doesnt kick in fast enough to keep me straight when I am in the snow, if I put a truck into 4wd in the snow or on the...
  9. J

    aAdding leafs to my truck

    Hi, My 96 ex after 140k is finally sagging in the rear, and I had to tow my camper a couple of weeks ago and it definietly could use some help, my camper is only 2600lbs and the truck did not like having it hitched to it at all. Anyway, I was gonna put on helper springs but I have another set of...
  10. J

    Even if it new you should still check it

    So.......today I decide to do the brakes on my wife's truck, the indicators have been screeming for a week and I was sick out of work and on the couch since last friday. So I go to take the wheel off the truck and I grab it to do the usuall ball joint and tie rod end check and to my dismay, the...
  11. J

    Is it supposed to be this way???

    Hi everyone. I had a question about the lower ball joints in my 96 XLT, I was changing a hub bearing today and when I had the upper control arm off I just happened to grab the spindle and try to lift it up and down while still connected to the lower A arm, and it moved about a half and inch up...
  12. J

    Stock alarm question

    I have a 96 XLT and it has a factory alarm in it, and when I press the lock button on my keypad twice, it doesnt honk the horn anymore, just flashes the lights. I know it used to honk the horn and flash the lights when the lock button was pressed twice, but not anymore. My other question is, I...
  13. J

    Changed my cats found another problem

    You guys might remember seeing me post a question about a 0420 trouble code a while back, well I changed the downstream O2 sensor and the code came back and has been there for a long time since, so I finally decided to change my cats, not only because of the code I have but also because the...
  14. J

    A/C Leaks?

    I have just been going through all of the A/C questions on here, and there is some good stuff on here!! My question is, what are some of the common leak points on explorers? I have a 97 sport 4.0 SOHC, the A/C takes a charge, the compressor kicks on and it gets cold, but then leaks out within...
  15. J

    receiver trailer hitch

    I have a 97 sport with a class 3 reciever hitch on it, I am selling the truck but I have a 96 4 door xlt and I was wondering if that hitch I have on the sport will fit my xlt, I heard somewhere that the hitches are different due to the length of the frames being different between the 2 door and...
  16. J

    1997 5r55e shifting problems

    Hi, I have a 97 sport with the 5r55e tranny in it, and I am having some problems with it shifting, and I think it may be electrical but I am not sure. The first thing I have noticed is that when I go to back out of my driveway, when I shift from Park to Reverse, there is a delay, it goes into...
  17. J

    1996/1995 catalytic convertor question

    Hi, I have a 96 explorer with bad cats on it, so I had gotten a 95 with good ones and I am going to swap cats, but I know that the 95 didnt have a downstream O2 sensor, so I was thinking that all I have to do is add an exhaust bung to the 95 cats and that would be that, right? Basically I was...
  18. J

    97 explorer tranny question

    Hi, I have a 97 explorer with a 5 speed auto tranny, apparently before I got this truck, someone over filled the tranny by about a quart and it seems to shift weird when I accellerate very hard and run out the rpms, it kinda bumps into the next gear, so I was thinking that maybee the tranny...
  19. J

    2 types of trannys for 96?

    I just had a guy e mail me because he wants to buy a tranny I have from a 95 parts truck, he says he has a 96 and that there are 2 different trannys for that year?????? One hold 3 quarts and the other holds 6? I think he is a little off, but I could be wrong, as far as I am concerned, 96 and 95...
  20. J

    Pats question

    I was just wondering what years they started the PATS in, my 97 doesnt have it because I always use a spare key to start the truck, but I am not too sure about my wife's 96, it has black plastic on the wide part of the key. Anyway, I just wanted to know how I can tell if the PATS system is in my...
  21. J

    2001 brush guard

    Hi, I was just wondering if anyone knew if a front brushguard from an 01 explorer would fit a 96 explorer, because for some reason I keep thinking that there was a change in the front with the frame or the bumper mounts, but I am not sure. If anyone could offer any advice I would appreciate it...
  22. J

    SOHC question

    Hi, I own a 97 sport with the SOHC 5 speed auto and 4.10 LS , I have seen on the forum that people kinda ragg on these engines and say that they are not that great, I think that the SOHC is great its smooth and its fast, i also have a 96 xlt with a 4.0 OHV 4 speed OD and 3.25s and it feels like...
  23. J

    95 explorer won't start

    Hi Everyone, I had a question about a 95 explorer I just picked up for parts. It was hit in the nose, on the driver's side, pretty bad, airbags deployed and all, and I was trying to see if I could get it to start, this way I could hear the engine run, and if it runs good I was gonna take it...
  24. J

    8.8 rear questions???

    Hi, I was wondering what the difference (besides gear ratio) there is between an 89 Lincoln LSC 8.8 rear that I just pulled out of a parts car for my street rod, and the 8.8 rear in my 97 Sport? I am doing some rear end noise troubleshooting and I am looking to swap the axle w/bearing and I...
  25. J

    Moaning grinding front end 97 X

    I just picked up a 97 explorer sport for 300 bucks, and its in pretty decent shape, I had to put some stuff into it, but its got 160k on it and seems to have been taken care of. The only problem I have is that is moans like you wouldnt beleive from the front end. I checked the hub bearings and...
Back
Top