Search results

Sitting on a like-new 5.0 V8 w/ Auto Transmission out of a 2014 F150. I also have a 2001 Explorer Eddie Bauer w/ a 5.0 pushrod V8 and auto trans. How difficult will this swap be? Should I swap the rear end from the F150 as well? thanks.

ya, just so you know - it was a huge pain in the ass - but in hindsight, it should not have been. Basically my stock power antenna stopped working, so I took the fender liner out and removed it. The second antenna - I made the mistake of cutting the cord and trying to splice it. I did...

Ya, it just cranked and didn't start. interesting lol

I was replacing my radio antenna last night, and one of the wire harnesses that goes through the firewall underneath the glovebox - it was in the way, so I decided to cut it. I thought it was just wiring for the power antenna module (which I replaced with a non-power unit). Anyways, i go to...

I just wanted to add is it looks I need to replace the Window Regulator? Is this the piece that contains the (2) runners with felt-like lining?? Assuming I purchase the motor and regulator, how difficult is this to install?

I have a 1998 Ford Explorer 5.0, eddie bauer (power windows) Where can I get both the front and rear guides (the ones with felt lining? The problem is my window is going down slowly because of either the guides or the motor scissor arms (one is bent). The window goes up just fine, but...

Hello, my metal, power radio antenna has gone out for the second time. Instead of messing with it, I would like to just get a rubber antenna (non-power). Is this something I can go purchase at a local Napa or Autozone? Do I need to order it online? What do you guys suggest? I would like to...

I get about 13-14 in city driving, and 18-19 on the highway. The 5.0 has been good to me, I figure she deserves a refresh w/ a rebuild kit.

Hello, I have a 1998 Explorer Eddie Bauer w/ the 5.0 V8. I've replaced the entire cooling system, and the entire A/C system (literally lol). The truck has 170,000 miles on it. It runs strong, but the MPG is very poor, and the engine is getting tired (although it is reliable!) So, is...

Holy crap Im pissed. A few months back, I dropped roughly $1000 into my A/C system on a 1998 Eddie Bauer V8 Explorer. Yes, not very wise - but i was really wanting to get it fixed. I had the whole system properly flushed, replaced the accumulator, condenser and compressor - and replaced...

The only drawback to the TT lift is the ride quality will eat you alive if it's a DD

Cool man, Im probably just paranoid. I've been through the ringer with this A/C system in the last few weeks, I wish I wasn't so stubborn or I would have just left it alone and gone without A/C altogether, but I had to fix it lol

Hello, I just installed my new compressor after flushing the entire A/C system, replacing the condenser, accumulator and orifice tube. Had the system evac'd and charged. I notice immediately that the new A/C compressor is very noisy, and you can hear it over the 5.0 exhaust when the...

As for the compressor - I put the required amount of oil in it, but of course when I was mounting it and plugging it in, I spilled probably 3 oz of the oil on the ground. I was told I can just add a few oz of oil to the entire system, and it should be fine. Also, I never put oil in the new...

I have a new accumulator on there right now. I've drove the vehicle about 15 miles today with the open condenser lines. The accumulator was open for maybe 45 seconds when I reinstalled it. How are you suppose to attach it to the system without opening it?

excellent, thanks for the quick reply man! heres to hoping there are no leaks when I get the condenser installed tomorrow! lol

Hello, I just went through a major A/C system overhaul (replaced everything from compressor to lines to accumulator, etc, etc) However, my new condenser won't be in until tomorrow. Can I start the truck up with the condenser lines open? Would like to make sure everything is working fine...

Sup folks. I just picked up a new condensor for my 98 Explorer 5.0 I got the old one out, and there are these (2) plastic holders for each side of the condensor. Well the new condensor doesn't fit with these plastic tabs. So I was wondering - can I mount hte condenser in there without...

Here is the THIRD orifice tube I've pulled out just in the last week. The new plan is to have the system completely flushed AGAIN by another mechanic, then I will install a new accumulator and replace the air compressor again (I just put a new one in but its already failing because of all the...

Ok thanks drdoom. So I just got back from the mechanic that did the AC work, and they evac'd the system for me and saved the freon. I came home and replaced the orifice filter. I pulled one out that was brand new just a few days ago and it was GUNKED up big time with crap (from all that stop...

Cool deal, thanks. I actually just found some DIY YouTube videos, doesn't look too difficult. So, just confirm though - before I replace these 2 things, I need to have a shop evac my system and then I can replace the accumulator/orifice - then I just need to have them recharge it? Im...

Ya, I really messed up doing the stop-leak in the AC system. So I ordered a new Accumulator for $17, should be here in a few days. Going to also order the orifice tube. Is it as simple as Evac'ing the sytem, replacing the accumulator and orifice tube, and then recharging the system? Do I...

Hello, This is a 1998 Explorer 5.0 w/ 152,x.. miles. About 6 months ago, my AC system went out, and I tried to do a recharge kit myself with stop-leak in the recharge kit, bad move I guess. I never could get cold air to blow so I finally took it to the mechanic. I had the A/C Compressor...

Hello, Turns out I need a new A/C compressor in my 5.0 Explorer. The A/C has a fresh recharge but it is barely cold, the mechanic diagnosed it as a compressor that is on its way out. Anyways, how much can I expect to spend for a junkyard A/C compressor? Or am I better off just buying a...

ya I do but they might be sold already, will let you know on thurs. (local sale)