Search results

For any that have done this mod, has anyone disassembled the chrome accent piece down the center of the shift handle? Am blacking out all of my dash chrome and want do do this piece as well . . . would like to remove without breaking it.

So, I read the awesomely detailed post by The Electrician. I'm looking at the Eaton TrueTrac for my rear. Here's the confusion . . . according to Eaton's site, this differential is NOT compatible with the IRS configuration, only a solid axle with C clips. I have consulted several 4WD and...

Anyone installed a limited slip differential into a 4WD? Does the 4WD system care?

Anyone know what other year Explorer front differentials are compatible with a 2008 Sport Trac? Want to swap in a 4.10 geared version.

2008 4.6 V8. The PCM shouldn't care, right . . . as long as both rear and front are the same gearing?

Anyone have a topper / camper shell on their ST? If so, which brand? Do you like it? Mind posting photos? Thanks!

Having a set of headers built for my 2008 4.6L. The builder wants to do a before and after dyno run, but only has a rear wheel dyno. Searched the forum on how to disable the front end. Found info that stated to pull fuse #6 and other info to pull fuse #33 . When we try this, the motor just...

Can anyone tell me exactly how the 2 pieces of the XLT front bumper attach to each other, and exactly what fasteners I would need if I bought the 2 pieces to replace my one piece Limited bumper? The parts diagram shows a "rivet" and a "screw" but doesn't show where they go or how many of each...

Anyone have a white XLT with a black grille? If so, could you please post photos. I'm thinking about doing the XLT look on my limited with black fender flare trim and bumper accents but not sure what it will look like when my black grille is right next to the black bumper. Thanks!

I have a low speed clicking noise. Only happens after it's been driven a mile or so and warmed up. I thought for sure it was the CV joint on the front drive shaft. My mechanic crawled along side the truck as I was going really slow and said it sounded like it was coming from there. I just...

On a 98 EB, behind the "Explorer" and "Eddie Bauer" name plaques, are there holes that locate them to the rear hatch? I'd like to remove mine for a little cleaner look but don't want to pull them off and then have little locating holes showing.

On a 98 EB, how do the flares attach besides the chrome screws you can see in the fender well? Are there some kind of clips, or is it adhesive tape that holds them tight against the body? How hard are they to remove?

Been researching the forum and I think I know the answer, but want to confirm . . . The only thing I want is more torque in the 2000-4000rpm range for towing. Supercharger then? Looks like they're both going to be about the same cost: supercharger is not as easy to find, but with the...

Roots type kit in good condition.

Already have Intake, 1" Plenum Spacer, Chip, Gibson Cat-Back Single Exhaust & TM Headers. Towing about 5000lbs at elevations of 5000-8000ft. Need a little more when pulling gradual inclines or hills. Thinking about swapping the stock 3.73's for 4.11's or 4.56's. 1- In addition to the...

Anyone done this? Looking for a little more "get up & go" when pulling hills out here in the west. Problems with the speed senor in the rear axle? Shifting in the tranny get messed up because of registering off the speed sensor? Thanks!

Just put my body lift blocks on and don't know what to torque the bolts to. I dont' have any instructions, and the OEM Service Manual doesn't even list it. Anyone know this? Thanks.

I'm looking at doing a front bumper conversion. Can someone give me a breakdown of all of the parts that make up the front bumper of a Mountaineer? This I know: Bumper Brackets Reinforcement Piece Plastic Facia Fog Lights Is there foam between the reinforcement and the facia? Are...

Is the gold color on the bottom of the 00-01 Mountaineers the same as the EB Tan on my 98? Anyone know the color code for the Mountaineer? Thanks.

Anyone tried one of those transmission pan drain plug kits where you drill a hole in your pan and install the gasket and bolt-like fitting that has a removeable plug . . . making it easier to drain the fluid? If so, what brand is it, and does it leak? Thanks.

How do you recalibrate the speedo on a 98 5.0? Is it by changing a gear where the cable attaches to the tranny like on the Gen 1 models? Thanks.

Anyone have these? Where is the switch located? I see them for sale on e-bay all the time and am wondering if I can retro them to my 98. Thanks.

Is there a way to increase the output of the stock subwoofer on my 98 EB? Thanks.

I am wanting to do a .75" - 1" (I have my reasons) body lift on my 98 5.0. What to do about the radiator? Do the stock bumper brackets have that much adjustment? Can they be modified? Know where I can find the blocks? Thanks.

I have a 98 5.0. Between second and third gear, from 2000-2500rpm, I'm getting this nasty resonant vibration I can feel under my feet. I noticed it a little before, but much worse since I changed to 31's. And, the more the engine lugs through this rpm range, the worse it is. If I really step...