Search results

I built mine-- I used a set for a toyota and modified them.

I use a pickle fork in the end of my air hammer --works great! Tap straight in on the end toward the shaft. If you grind the tool it will e too thin and just break (trust me on that one).

4.56 all the way

You don't need to go with the whole axle-- you can just mount up the brackets from a disk brake axle- and calipers and such-- you will still have to modify brake lines and e-brake cable either way.

I liked mine but now have James duff-- I like the way they work.

Glad you got it :-)

You could check your fuel pressure-- this will tell you if your fuel pressure regulator is good. You might want to make sure you have a goos O@ sensor as well. The maf is in the air intake path.

You can heat and dimple the header for a little clearance but 3" is allot.

transfer case gears and driveshafts are the same- you only have to change the ecu if you are going to different years of truck- you will need the wiring harness for the tranny you are putting in. The floor plate will need changed or cut-- you will have to mount the reservoir and the master...

B2 did have solid axles. Easiest is an early Bronco or full size Dana 44.

Anything is possible--- but you wouldn be changing JUST the steering gearbox you would have to change the whole steering set up.

um your wheels fell off :-)

James Duff used to make one with an "axle truss" I bought mine on Ebay for $75 and through the truss away. I bought my diff cover from a company called SOLID - it is tough and works great.

I got somwhere around 5 inches after everything settled down 6 months after the swap

griff is correct

Nice work!

It was back to the 80's HAMMER TIME! I use a boddy hammer to pull the hub and spindle off. Those things can get really stuck.

That worked for me!

I bought a set for a Toyota like was mentioned above-- easy to install and look great

Work as much overtime as you can to get your checking account ready! :-) Seriously what do you want the end product to be? Rock crawler- daily driver? pre runner?

Hope that works for You,

Wow never heard of that -- could you use air to clean out the cable?

I have been thinking about this too- I already have a bii tank.

Why is it dead?

I was thinking of something similar actually.