Search results

Here's a problem that I am encountering on my 2002 XLT. My 4x4 lo & hi engage properly, Indicator lights work fine. Problem is, as soon as I hit the accelerator it turns off the 4x4. Even in park. Has anyone come accross this issue? Ken

I noticed on my 2002 XLT I am getting a slight rattle & sound when breaking at slow speed. Is this a break or hub issue? anyone have advice what to look for? Ken

I just recently noticed that the 4x4 buttons don't activaterr the 4x4 anymore after I removed the center column bezel. I am thinking it may be a stretched wire or the switch. Anyone have any suggestions, or any way top test the switches? Ken

I am prepping the rear trim on the liftgate glass on my 2002xlt. I need a little advice on rattle can painting on the plastic trim. The color code (tx), mineral grey is to be applied. I am prepping for 2 coats of color, and 1 clear coat. My dilemma is, should I sand between coats...

Has anyone replaced the rear wiper motor on a Gen3? Being a dumbass, while replacing the liftgate struts, I manage to break the glass. After getting a replacement, I have all the other parts back on but the wiper motor. My dilemma is, I managed to get the wiper off with the bolt, but...

I have recently purchased a 2002 XLT, but am troubleshooting the DRL. Under Canadian law this model should have DRL, but I get none. I have checked the fuses & relays in the distribution box, and under the dash with no problems found. Swapped out the fuses & relays. Anyone know the...

I am finally looking into updating my X, looking at a few. One that I have my eye on is a 2002 XLT (1fmzu73e02za18245) Looks good, no codes, a bit higher milage than I like (280000km) The only issue with it is a noisy clutch in the limited slip diff. what do you guys/gals think? Ken

after a recent highway run, we noticed the o/d light flashing. Then the CEL came on. Since I remembered I had my programer in the truck, I decided to pull the codes, and reset them. This is what I got: P0732 Gear 2 Incorrect ratio P0735 Gear 5 Incorrect ratio P0741 Torque Converter...

Thinking of ordering an Aussie Locker for the front, with my rear LS. http://www.offroadlockers.com/item.php/TM3bac61/7986/06/306011/.html Anyone done so yet? and what about their warning about "Under no circumstances should the Aussie Locker be installed in the front of a full- time 4...

In recent weeks I started considering a tranny cooler for my 4.0. Upon inspection, I find it does not have the tow package, nor the secondary tranny cooler. The Tranny lines go directly to the Radiator. My dillemma is, I recently have a cooler on order, just need to know exactly where is...

Finally decided to put up some pics of the EX before I do my major mods. http://www.explorerforum.com/forums/album.php?albumid=6 As we all know, it never ends, adding to my list daily. I'll list the particulars when I get a chance. It's not just a truck, it's a lifestyle.... Ken

I just finished installing a set of HI/LO HIDs from VME. The problem I am encountering is that they are not switching from HI/LO vise versa unless I put a bulb in the free 9007 socket. Anyone have any ideas what can be done? These are those magnetic bulbs that pull the bulb inward to...

To remove reflector or not on Hid upgrade on black headlights? That is the question... Anyone? Ken

I know it's a bit premature, but I may not be around for the next few days. HAPPY CANADA DAY!!!! to all, and happy independance day to all our neighbours to the south. And a shout out for the rest of the wourld to what you may celebrate in the next few days. Play safe Ken...

Has anyone done this? I was thinking of doing it to mine, but notice that the bulbs are mounted with screws and not the standard 9007s on JDM's. Just want to make sure I get the proper size HIDs for the lights. Ken

COW+Rust+Winshield=Lotsa Hours >>Need paint advice now<< I have a big problem, RUST. I noticed in the last rainfall that my winshield was leaking, so I decided to put it in the garage and take a quick look. I noticed surface lifting of the paint upon closer examination, so I decided to...

High pitch whining sound under hood in hot weather. I'm guessing that it is my AC compressor bearing, but haven't had a chance to check it under the hood, and when I do the sound isn't there. Any suggestions?

I noticed that my X started having a bit of rust at the point the roof is connected to the winshield. Is there a way to remove the black moulding without removing the winshield so I can acces the rust? Without too much dust getting in to truck. I will be replacing the winshield in the near...

I notice a lot of you have billet grills installed behind the grills, and see them everywhere on ebay. I have one question, how do you access the hood latch with them installed?

Anyone have any experience with rust prevention/inhibitor devices? http://www.counteractrust.com/

Anyone home? It's seems awfully quiet in here. :rolleyes: -mc

Anyone with experience with por-15? I recently purchased the solvent, por-15, degreaser, and prep. & etching primer for some surface rust repair. How thick is the por-15?, as the suggest 5% solvent to thin it for sprayers. My question is... How thick does it apply either brush or...

Just have a quick question on the xcal2, when the tune is done on the vehicle. How can you confirm that the tune has been made, and the xcal2 has not returned it to stock? -mc

Now that all my mechanical problems & mods are done, now the fun stuff.... Rust removal.... Just surface rust so far (wheel wells, rocker, and some small quater shaped spots), so I ordered up some por-15 to deal with that problem. 1st dilemma is... do I keep the truck all red, or do I...

Hey Pottsy, how about a rear bumper w/tire carrier? It could be a combination of the current plans found on this site. As I bet that would be a project in much demand. Should be good for Gen1 & Gen2 also as the dimensions of the frame brackets should be similar. -mc PS: if you do...