Search results

yeap, these are OEM F150 tow hooks / F85A-17A954-0A 2000 FORD EXPEDITION F150 PICKUP TOW HOOKS

This is my 3 rd Gen. spacer lift 2.25" front and 1.75" rear / Body lift 3" /285 75 R17 Cooper Discoverer ST

I like the design I found in 2005 for the Toyota and here is my old bumper from 2nd gen

I wonder if anyone made any awesome version of the off road front bumper for the 3rd generation. I am looking for a project as in the picture for 2ndgen

when loosening the frame bolts, it is worth to use the induction screw heater for all bolts and an impact wrench like MILWAUKEE – it reduces the disassembly time and makes the work more easier for sure Body lift 3 inch and and 4,7 inch 2nd generation done

short update based on all collected information, I did prototypes material Steel 40HM (1.7225) One without a mounting hole because it is a weak point and is unnecessary for the 3rd Generation in my opinion. For sure in my 2004 Explorer there is no such need. The second with mounting hole...

Installation done Skid plate - stainless 4301 - 3.0 mm installation kit: 4 x M12x40 4 x spring washer Braket 2 x with M12 Nut - 1,5 mm Loctite 4xM10 x25 4 x flat washer Loctite if necessary add 2 x tow hooks Ford F85A-17A954-0A 2000 FORD EXPEDITION F150 PICKUP TOW HOOKS 2 x Tow Hook...

I wonder if anyone can confirm the dimensions of steering intermediate shaft / universal joint for Ford Explorer III to be roughly .5” wide and roughly .64” tall. But what are the exact dimensions ?

after reviewing and first installation the whole concept has been changed - mounting bracket at tow hooks need to be adjusted for better assembly

First prototype dome 1.4301 s/s thickness 3.0 mm

update, drawing will follow after prototype. Some dimensions may be slightly different from the final version dimensions are in [ cm / mm ] /metric

additionally you can add also front skid plate https://www.explorerforum.com/forums/threads/ford-explorer-2002-2005-front-skid-plate.487366/

Initial dimensions of the mockup Ford Explorer front skid plate base on factory Ford Ranger front skid plate M-5018-R All dimensions are in [ cm ] /metric / angle ca.160 degrees Mounting with a bracket to front tow hook bolts and tow hook nut plate W712330S441 / W706973-S441n

I appreciate your help, as I understood the adapter has a - 1/8-27 NPT port and M10 x 1.0 thread

Temperature Auto Gauge sensor has a - 1/8-27 NPT port What thread does the extension have to transmission?

Transmission Fluid Temperature I wonder does anyone have installed a sender unit for transmission temperature gauge at pressure control tap?

They are the same as ZON3396 which I bought from Fat Bob's Garage zon3396 - Available Now in the Fat Bob's Garage Online Store any news regarding steering extension?

if you create sketches I can create drawings and dxf for laser, but I need dimensions in (mm) I bought screws listed below to prepare set for body lift 3 " ZON3396 - Bulk Body Lift Block 3" Tall x 3" Wide / from Fat Bob's Garage zon3396 - Available Now in the Fat Bob's Garage Online...

I did that to my old Explorer, requires some adjustment during assembly

Ford Explorer 1995 rear bumper like Ford Raptor

Thx Dude , That's the other thing I was thinking about.

I wonder if anyone has drawings, mockup or model for upper control arm? I’m looking for something similar to uniball upper arm 02-05 Explorer uniball upper arms Delivery costs, customs and VAT to Poland are more expensive or very similar than the purchase price from BTF

dxf file are only ready for laser cutting w/o dimension, e-mail address priv please

I can't add dxf files, the forum does not provide this option for my user

Attached drawings for those who want to do it themselves - Ford Explorer 2004 Serious Explorations Explorer Forum Ford Explorer and Ranger Enthusiasts