Search results

I need one bad. Mine is about an 1/8 of an inch away from my alternator pulley.

Im losing antifreeze in my motor and im starving for power so I was thinking just rip the motor out and replace with something bigger instead of fixing the 4.0 and it still have the power of a smart car. Truck is 4WD and auto. I want to go AT LEAST 351W - 460 while still maintaining 4WD...

Ok so I had a few beers and was thinking, I want to install my brand new pacesetter headers and y pipe, plus delete the cats with another pipe. I broke 1 bolt in my head and got another one out, I know how they're prone to breakage. What if I cut the heads off the bolts, lube up the...

I recently picked up a novi 1000rr thinking it could fit on my mustang. NOPE. So maybe I can fit it on my truck. MAF is not going to be an issue for me, but a bracket will be. I heard they used to put Vortech's on the 4.0 OHV. Maybe somebody can make a custom bracket for me, or theres one...

F17F-12A650-ZA I need to know if the above number is for a Automatic, 4x4.

Power is getting to the computer and chec engine light does not come on with key turned.

1992 Ford Explorer XLT. Changed fuel pump, fuel pump relay, EEC relay, fuel filter . Not getting power to fuel relay when key is turned. Pump turns on if jumped but relay will not get energized by the ECU, im assuming. NO INERTIA SWITCH. All fuses under hood and inside are good.

I would go for this but the adapter is way too much money for me to buy right now. Thought I would share this to help you guys out. Its a rebuilt M62 supercharger...

I'm putting a set of pacesetter headers on my 92 explorer. I got maybe 4 bolts broke loose on the drivers side. The others, I can't see...the passenger side header...I CANT SEE THE WHOLE THING. Is there an easier way to get these bolts out? Maybe taking out the inner fenders or something?

I want to bid on this but I dont know what else it would involve to install. Probably more than what my truck is worth. http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=290418933959&viewitem=&_trkparms=algo%3DLVI%26its%3DI%26otn%3D1&category=33741

Thought i'd post this to help people out on this forum. Rebuilt M62 Supercharger off of an xterra on craigslist. http://cnj.craigslist.org/pts/1641825809.html

I got the M62 supercharger but I just need the adapter plate that goes between the S/C and the intake. Let me know if any of you can make one for me, and how much you want.

i bought a set of 95tm heads off of a 96 explorer v6. I thought it was a direct bolt in but there seems to be a problem with the ports that connect from the bottom of the lower intake to the heads. The ports on the heads are rectangular and on the intake there a wierd shape because a bolt seems...

I bought a Fully Rebuilt M62 supercharger off of a Frontier on ebay for $124 including shipping. I know they sell the adapter to put this on a 4.0 but my question is, Do they sell those pieces seperately or do I have to buy all the pieces as one kit?

Im running very lean, i dont know how lean...but I am. Im eventually going with a supercharger from a Nissan Frontier/Xterra. Ive already upgraded the throttle body to a 66mm, and bigger MAF housing, and CAI. So if I dont do anything about the fuel system now, im looking for trouble. As of...

I installed a Brand New BBK 66mm Throttle Body the other day. I get a rough idle and it stalls sometimes until it warms up. I get a check engine light on and it idles perfect, when the light goes off it idles rough again at about 500. I have a code reader and got the codes 998 PAUSE 157...

How much boost does it put out? And is it safe with milled 95tm heads and the stock bottom end?

Im thinking about getting an M68 supercharger from a Nissan Frontier / Xterra, and just wanted to know how much psi they put out...and is it safe for a stock bottom end?

is there ANY kind of intake plenum that fits on the stock lower intake? Idk if i want one as of now but I will in the future, im just doing this for SH!TS and GIGGLES lol

Im thinking of adding one 12 inch sub in a custom box under my back seat and 2 more 6x8's wired as mids. My current setup is: (2) Pyle 15 Inch 1400 watt subs 1440 Watt Power Acoustik Amp 500 Watt Rampage Amp Lanzar 5 Farad Capacitor Logic 2 to 3 way Crossover Custom 6 Cubic Foot...

Does some company make a handheld tuner for the 1st gens?? Im running lean at idle but richer as the rpms go higher. Is there a swap computer I can use, maybe from 2nd gens? Any suggestions?

would they fit on a 92 Explorer 4x4?

I was wondering what I can do to get some more horses out of my 92 Ford Explorer 4x4 XLT. I have Flowmaster 50 series exhaust, a Shoreline Technologies Chip, Homemade Cold Air Intake, new plugs, wires. Is there anything easy I can do, like clean something etc. Anything cheap for sale out...