Search results

i need specs on a speaker box that will fit in where the mtx thunderform box goes. has anyone made a box that goes there? (pass side rear) just wondering if anyone had a dimensioned drawing that i could use to build myself a box so i dont have to go out and measure everything in 26 degree weather.

ok so i have a 98 explorer xlt 4wd 4.0 sohc blah blah blah and i wanna put a 5.0 in it from a donor truck. now my question is, would one from a 96 explorer work? i know i gotta swap all the junk in the engine bay, but would i have issues with the fuel system between those years? also, would i...

ok so i got an egr code, a tranny code, and an o2 sensor code all at the same time. so i checked fuse 13 under the hood. i replaced it and it blew again instantly.. any ideas? im gonna try replacing it again and unhooking the battery just to be sure, but im at a loss here. what would cause this...

http://www.louisville4x4.com/fsusexplorer.htm you can buy just the front kit from there for 600 bucks. im gonna go for it, then soa the rear.

WHAT YOU NEED: TOOLS: hacksaw wd-40 ( for seized bolts) c clamp 18mm wrench or ratchet (i used breaker bar) vise grips bench vise here is the supply list. in case you cant read the reciept, i will list the parts i bought. here is a list of what i needed to buy...

im going to replace them with longer bolts, but i wanted to make sure its not going to knock my head off in the process. would it be ok to just jack the truck up, pop the bolt out, and stick a new one in, or is it more involved than that?

this is what happens when you dont drop your cargo before offroading. the good news is, i pulled a cop out that got stuck in the mud (in his cruiser) :roll:

...

i have a gray vacuum line under the hood that looks like maybe it plugs into the manifold, but i cant for the life of me figure out where. it comes up on the passenger side by all the ac junk. its the only one left, and it has me stumped for sure. any ideas? oh. i have a 98 xlt sohc with a 97...