Search results

This is for a OE Motorcraft battery harness assembly for a V8 Explorer. The Motorcraft part number is WC9451E. Retail was $175 for this harness and I never saw it priced below $135. I'm not sure you can even buy it anymore as I can't find it in stock anywhere. This also includes the wiring...

This will automatically default your transmission to OD "OFF" on start up. The button will still work as it always has. Here is the sticky where I originally installed it: http://www.explorerforum.com/forums/showthread.php?t=251513 I have left a little of the factory harness still...

This is a sunvisor with Homelink and voice recorder. This came on the Eddie Bauer and Limited models. Works just great...plus I cut some of the harness to give you a pigtail to work with when you wire it up. Two simple wires. Sorry it's dirty...I didn't notice until I got it off. I'll see...

I have TWO of these...both in great shape. These are off a 1999 Explorer...but will fit other years. However, to be totally accurate with the application, they are the "beige" controllers. $35 shipped in the lower 48.

This is an electric full sweep oil pressure gauge by Marshall gauges, plus an Aeroforce FD501 for 1996-2003 Ford Explorers and other Ford/Lincoln/Mercury products. (non CAN) Both work as advertised. The FD501 is a green display. Oil pressure gauge comes with sending unit and steel braided...

I have an excellent console lid for sale. $60 + $10.50 shipping to the lower 48. I know...the price is expensive...but I can get that price all day long on eBay for one this nice. I wanted to offer it first here.

I have a JL Audio 8" 8W1v2.4 subwoofer and factory amp with pigtails. The subwoofer fits the Explorer factory location perfectly. Excellent condition with no defects. $50 plus shipping.

I have a complete jack assy for sale. $40 plus shipping. Thanks!

Ok guys...I have a few things to sell. I will enter most of them into their own thread so we don't get a bunch of items in one and somebody misses out by not looking through the entire thread. This is for a memory seat seat up. I believe it is out of a 1996 Limited that I had installed in...

After all these years of great service, I am parting out my Explorer. In the next several days, I will have a few items to list...including Torque Monster headers, HEADERS ARE SOLDand an SCT Tuner with tunes by James. For now, I have a couple items some folks may be interested in: ***GONE***A...

I am needing a memory seat module that came in an Explorer Limited. I believe the one I need is for years 1994 to 1997. Does anyone know if there is another module that will interchange with that one? Maybe a car or expedition, etc? Your help is appreciated.

I am looking for a memory seat module for an Explorer. The one I have (that's bad) starts with part number 'F4'. I believe it's for 1994 to 1997, but I'm not certain. If you have one, please let me know. Or if you know of an interchange with another model that works, please let me know...

I am looking for a circuit in the ECM that either goes to ground or 12V (either one) AFTER the engine starts. In other words, just turning on the key will not initiate the circuit. It has to see the engine running before it switches. Does the a/c compressor circuit do this? Any other ideas...

I'm not sure if this has ever been addressed, but I stumbled onto this when I had a guy on his high end BMW tell me about his gauge. I checked it out with ours, and sure enough...the same strategy. It seems that Ford doesn't want us to really know (or worry) about a large range of engine...

Folks, has anyone here ever removed the harness from the body to the door pivot on the driver's door? If you separate the plug inside the hinge area, what does it take to remove the harness from that connector back into the body? I have some repair work to do there and want to remove it from...

I need some help locating a 12lb or 13lb radiator cap for a '99 5.0. I can find 16lb caps all day long, but I'll be darned if I can find the others. Any direction you can guide me would be appreciated.

I decided my 99 5.0 AWD could use new body mounts. Crawling around under the car I could see they were showing their age. So I called the good guys at Silver State Ford and ordered an entire set...uppers and lowers. The two uppers for #4 were on back order, but I found a couple in Oklahoma...

I've always been irked that the transmission on Ford products defaults to Overdrive being activated. Since it's not a good idea to let your transmission be hunting back and forth between direct and overdrive while you drive around town, I try and remember to shut it off. However, I usually...

Can anyone take a good, up close and detailed picture of the a/c condenser (factory issue only!) on a V8 2nd gen Explorer/Mountaineer? I need to see the plate and fin details only. I need to see the difference between factory and aftermarket. You would think that in Phoenix, AZ I could find a...

There has been a lot of discussion about what electric fan will fit a 2nd gen 5.0 with the thick core radiator. Somewhere around 2000 or 2001, Ford put a thinner core, more efficient radiator in the 5.0 that allows a lot more clearance. But for the most of us, you only get 3.5" of clearance...

On a fully loaded 1999 Eddie Bauer... Which output alternator would you say came with the vehicle from the factory? I went to the factory Specification Book and it shows three different alternators were available for the Explorer/Mountaineer in 1999. Here is exactly how they list them...

If you are a gearhead, you need to read this. Absolutely mad skills and big brass ones to attempt something like this. Enjoy and let him know your appreciation! He's a member here. http://mooktank.com/

Don't know where else to put this. Ever wonder why some days your car runs like a scalded dog and other days it won't fall out of a tree? Check this out. http://www.dragtimes.com/da-density-altitude-calculator.php

I just installed the Flowmaster cat back kit on my 99 5.0. http://store.summitracing.com/partdetail.asp?autofilter=1&part=FLO-17364&N=700+4294908331+4294922451+4294907830+4294924666+115&autoview=sku It says it only fits 2000 and 2001...but it appears to me that it fits any 4 dr 5.0 with...

99 EB with the Mach system. Factory subwoofer sounds like a box of marbles and I need a new one. Found a nice aftermarket one that will drop right in. But I'm not sure which one I need. Is the factory subwoofer 2 ohm, 4 ohm, or 8 ohm? Thanks!