Search results

I have searched and all motor issues are for 2nd Gen and arm removal that came up. I don't know if this build uses a tapered shaft as I had seen mention. We got the motor going with manual assist and powering on but once stopped a while I cannot move on its own. I was looking for pointers on...

This isn't the time of year I'd want to do it but looks like its going to need to be done. We've been topping off the rad even after downgrading the Rad cap to a lower pressure one as recommended in many older thread. The rear heater hose clamp was leaking. That was fixed and resolved. The...

Well we were getting the Explorer rust sprayed and the tech said the front sway bar links are totally missing!!! LOL Wow what a design. I have seen some parts and it looks like a super long bolt with bushings. Even the MOOG one appears lacking. Mevotech appears to have a different approach...

Well its been done in the summer which may make the rubber seal more pliable. However I did warm the engine prior to draining it for my son. We've been using a nylon tool which goes on the end. Its equipped with a 3/8" opening for a ratchet but really useless unless the filter is loose to start...

I am checking the manual and its difficult to know what has be currently in the system. The rad is full, checked a few times but the reservoir is not and topping it up before Fall/Winter would be nice. However, reading the PDF. • Add Motorcraft Premium Gold Engine Coolant or equivalent meeting...

Well doing maintenance today. 1st time taking the OEM sized oil filter (Wix 51372). The plastic cap I have which can be turned with 3/8" drive or 1" socket over the end barely does the job getting it off. I had to resort to using the 1" socket for enough torque to break the filter free. 4000km...

FYI - Reference Ford’s most powerful and successful V-8 ever http://www.msn.com/en-ca/autos/enthusiasts/ford%E2%80%99s-most-powerful-and-successful-v-8-ever-is-ripe-for-the-picking-for-your-truck/ar-BBBPn9c?li=AAggFp0

Given we have 20" Rims on this and the OEM size is 255R50/20 which sets the baseline for viable choices. We're not looking for a winter tire but a good traction tire in foul weather is key in a tire IMO, not millage since they do nothing for you if you wrecked the vehicle because they couldn't...

I have searched around old threads on mostly removing old side rails on 4th Gen Explorers. Anyone installed aftermarket Chrome or Stainless tube style (not flat ones). Most discussions are for earlier years I found but no recommendations or experience found.

I read loads of posts on mods for earlier Generation Explorers and other tapping into the parking light for power to latch the relay in. However, it doesn't apply to the 2009 and I am wondering if anyone had done this on this Explorer. If I pull the fog switch on the fog light should come on...

For 2009 with 20" factory rims. Will 17" work or does it have to be 18" as I been looking for a used Ford set of rims, maybe from an F150 or such hub centric as well. Anyone done something with a 2nd set?

I expect there is at least a vertical adjustment. Currently there is a big dark area in front of the driver I am hoping the bulb is just in wrong. Anyone done an adjustment on an 2009? Looked again and found the info on Page 90. No option to delete the post and only a vertical adjustment was...

I have seen from various auto reference sites there are builds with 2WD, 4WD, & AWD. One one they indicated 4WD is a full time system on these. While AWD is not full time which is preferable. I have scoured threads and not seeing a definitive explanation of the drive train. The AWD system I...

Well shopping for front rotors and pads for the Explorer Sport 2002. I am getting asked by some sources about height. I have no idea of what height they're talking about nor how it relates to the fitment of brake rotors or pads. Some parts sources don't ask so do they know something the others...

Is this a known issue with the 2002 Sport 2 door? It started doing it on its own. Although inexplicably returns to normal operation then pins above the F mark later again. I need a warm day to crawl under and check the harness etc. I don't know where its getting its ground and of course...

I am thinking about getting an earlier 98 or so Explorer. I had a 91 high millage and got it all working and was pretty good in the end. Its long gone and I have a 2002 Sport my son has. Now here is the kicker, I have a 2002 Grand Cherokee 4x4 but like various aspect of the old Explorer so I...

I have tried to get a upper rad hose but the parts stores cross reference for this 2002 Sport hose is all wrong. Bends and angles are not even close the what is on the vehicle. The top part of the hose I got did not have the near 90 lateral direction change and would also have to be bent way...

For a few years now there is water coming into the rear (behind the back seat) on the inside of rear passenger window from the plastic covering. The ceiling is never wet and this only happens in heavy rainfall. A pool builds up in the storage area. We decided to tackle this recently and the...

I was checking our Sport after an oil change and noticed the reservoir was empty of coolant. Pulled the rad cap and couldn't see any fluid either. Now my son didn't know what colour the fluid was before and I didn't remember either so we checked the manual. Not much help either. It could have...

I am looking for a Daytime Running Light Module. I tried a wrecker last year without success. None of the vehicles were new enough. A number of cars as well but could not locate the module in most Ford cars. I appears that Ford changed the module used in this 2002 Sport 4x4. What years or...

I am new to the car waxing game and still am not sure what prodcuts to steer away from. I find myself needing more detail spray to use a clay bar. My bar came in a mothers showtime and pre cleaner wax. What is your opinion on the better product. The mothers products or Meguiars quick detailer...

Hey guys I just purchased a buffer from a garage sale and I plan to use on my own as well as family vehicles. As I am new to the waxing game I decided to ask first before I start. What waxes work well with a metalic paint job? What are the best steps to take in prep? What tips and tricks do...

I suspect the X doors are indentical or vary close over the years. But to clarify this is a 2 Door Sport 2002. The drivers door drops slightly when opened and I can see it raise a bit when closed after latching closed. I read somewhere the door pin likely needs replacing. I suspect its the...

I was about to do an oil change after just under 3000km. The last oil was dino oil changed when we go this X Sport which we ran for just over 2000km. The oil level had not changed but I noticed it was quite dark on the dipstick, more so than normal. I was likely the Penzoil Full Synthetic...

Hi I have spent some time reading all the treads in the Technician Tips Area and checked the 02 Sport which has the 4.0 SOHC as the marking on the crossmember state. There is little info on the vacumn routing diagram. Is there a DPFE control in the EGR circuit or is that some engines other that...