2007 ford explorer

I have a 2007 XLT Explorer. My AC only works on fan settings 2 and 3 (1 and 4 basically turn off the air.) I've changed the blower motor resistor as well as the switch on the dashboard, neither of which solved the problem. 2 and 3 also work when I switch to any of the other settings on the right...

I recently had an issue with a 2-3 flare and P7033 and P0745 codes on my 5r55s transmission in my 4.0L 2WD EB explorer. Initially replaced the Shift Soleniod to no avail, followed by a servo change in both OD and Intermediate. Finally dropped the trans out and found a broken Intermediate band...

2007 4.0 SOHC 4WD. I know this topic has been beaten to death but when I cold-start my truck I have a slight rattle which goes away very quickly (unless its REALLY cold out then it lasts a little longer). When the truck warms up the engine is super quiet and has good power. The only other thing...

Hello everyone, when I bought my ‘07 Explorer the HVAC only worked on the highest speed. I changed out the blower motor resistor and got all four speeds back, however, the blower felt really weak. Eventually I started getting a heavy electronic burning smell from the vents and nearly nothing was...

Hi First of all, I want to apologize if this subforum isn't the correct place to post. But, I am a first time member here on the forums, hope you all excuse me. Anyways, I have had a 2007 ford explorer (Eddie Bauer 4.0L V6) for the past 3 years with no issues at all. About a month ago, the car...

Hi, I own a 2007 Ford Explorer. I'm pretty serious about this SUV; I take very good care of it and I do light off roading here and there. I have began going on trails at night and for safety I think I need a light bar as the headlights aren't always sufficient. I looked around and only found...

I cannot find my idle air control valve location at all. Does anyone know where it is located?

I apologize if I'm posting this in the wrong place. (I have no idea where to post or where this is even going to post) My question is I have a 2007 Ford explorer limited v8. Drives great runs great, well about a month ago, my sun/moon roof, power driver seat, and adjustable pedals all stopped...

Hi all, 2007 Ford Explorer Eddie Bauer - about 116,000 miles on it. Honestly, it has treated me great - and I have also treated it great in return. Always up on the scheduled maintenance, and I've probably done more things to it that are not "needed" (depending on who you talk to) than most -...

2007 Sport Trac. 155 K miles I have several problems: (other than these listed the PU has been a great truck.) 1. Can not keep exhaust gaskets from leaking. Three new manifolds on right, one on left. (Ford gaskets and Felpro) Switched to bolts and again back to studs Nothing works...

Hello all, The 2nd row seats of my 2007 explorer xlt were damaged and I had to remove them. However, am finding it very difficult to find replacement seats. I've tried a few junk yards in my area with no luck. Any idea where I can get them? Don't need anything fancy, just regular working...

I recently bought a 2007 Eddie Bauer explorer in the begging of march upgrading from a 2002 ford explorer. The truck is great, but it has one problem the radiator fan was very loud so i was told it need to be replaced and had it replaced. It is not as loud as it was before. But now sometimes...

OK. So I researched and read a lot about the differences between 05 and earlier and 07 bed extenders. I have an after market cover so I decided to be patient and watch for an 07-10 extender on Craigslist/eBay. Found one, practically new. It cuts in sharper than the red version in my buddies ST...

Just bought my first Ford Explorer and have no idea what to expect. Am pretty excited but would love to know what type of upgrades were made from the previous models. (I am aware of the armrest indents for easier door closing but not much else). I am in pretty alien territory as I am coming...

I have a 07 eddie bauer 4.6l with 78,000 recently it seems to be chugging almost like a sputter when im in 4th or 5th gear 40-60 also if i step on the gas hard it slips out feel like the trans droped on the road. I recently put a K&N intake on it and also and flowmaster 50 series on i removed...

My son removed his belt tentioner on his 2007 Explorer and now can"t reload the tentioner? It seems to me the travel in the tentioner is all the out (unloaded). Any help?

Wiper motor will work but needs help. I removed the whole unit from the rear window. On my bench I removed the 8 or so starbit screws, removed the cover & exposed the gears. I removed 2 more starbit screws holding the motor casing on to expose the magnets of the motor itself. At this point I...