cluster

Is it possible to have CarPlay navigation arrows display on the speedometer just like it does for the Ford navigation? 23 XLT Running Sync 3.4.

1995 Cluster gauge went out one day. Removed instrument panel and took out each gauge. Burnt plastic smell coming from the gas and temperature gauge set. Slight discoloration on white plastic under temperature gauge housing only. Nothing severe. Everything else is fine. Circuit board/ film was...

Hello everyone. I have a 2014 I am getting ready to install a new dash cluster. Looking for info on setting mileage on new one. Is that something that I can do in forscan ? Thanks for your response in advance.

I've been lurking for the past year and have used a lot of information from this forum to keep my Explorer going. Last weekend LKQ was running a 40% off labor day sale so I went and looked around. I found a 2003 Mountaineer with the message center cluster and thought that would be a cool...

I recently got new needles from a different year explorer (I got the white ones instead of red/orange). How do I get them back to read what I had before I replaced them? Is there a reset I can do for this ?

Hi guys! Just bought the truck and getting to know fault´s and features :-) When switching the knob between different drive type´s it engages 4wd low and the light comes on. When switching to 4wd high i can hear the relay-box, behind the glovebox, switch but the control-light will not come on...

Hi all, I recently swapped out my instrument cluster due to the gauges not reading properly. This is on a 2003 Explorer XLT. Install went well and everything works great, only issue is the odometer. It now reads exactly 30k less (coincidence or other issue I'm not sure) than it did with the...

The dash and radio lights quit working. I was told the bulbs are blown but what would cause all the bulbs to blow at one time. the specialty bulbs such as the warning, high beams, and cruise control, etc. still work. only the instruments and radio and heater control lights don't work. fuse is...

Ok, This is in my 97 Explorer. I replaced all the lights in the instrument cluster with LED's. Everything is good except for the Cruise Control, ABS, Lo 4x4 and Airbag lights. The ABS blinks and the others stay illuminated... :/ Has anyone else had this issue before? The only thing I can...

Hello fellas! Well I have switched all 16 lights in my instrument panel to LED's, the ONLY downside I have found is when the truck is running, the 4x4 button lights are dimly lit. That's not much of a problem though. BUT it made me decide I want to add resistors to the wires so I know everything...

Hey guys I need some help. So today I pulled my instrument cluster out and replaced the five 194 bulbs with LED's. All my cluster lights worked before but now the lights on my tach dont come on. It looked like there were smaller bulb sockets surrounding the main 194 bulbs but i didnt pull them...

People my odometer stop to work, maybe because i pulled out 2 bulbs from the cluster? i remove high and low lights(4x4) because it dont work and the lights bother me, i did 2 weeks ago, but now i noticed my odometer and tripmeter doest work. help me. thanx:exporange

I just noticed yesterday that my DRLs were not on while i had my headlights on. I figured i may have blown a fuse, so i checked it, and the fuse looked fine but i went ahead and replaced it anyway. Well, still no DRLs. So get back in my explorer and realize my gauge cluster lights are not on...

hello, my 07 eddie bauer v8 suddenly went haywire and dinging and said service rsc now and low fuel even with a full tank, also airbag light and abs came on. i turned off the car and it wouldnt start back up. i pluged my pocket scaner in and it says no link. unpluged the batt for 3 hours and it...

Newbie - so be gentle - been following this site since I acquired my truck, back in November - looks great, full of wise heads. Few niggles already solved, but one 'major' one is doing my head in, so I need to fix! On start-up , speedo needle moves gently (~1sec) from zero up to 52mph, then...

1996 Explorer XLT 4.0L I began this saga trying to fix an instrument cluster where the odometer and trip meter did not work and the tachometer worked intermittently. All other gauges worked correctly. I bought a used cluster, removed the old one and replaced it with the one I recently...

1996 Explorer XLT 4.0L I began this saga trying to fix an instrument cluster where the odometer and trip meter did not work and the tachometer worked intermittently. All other gauges worked correctly. I bought a used cluster, removed the old one and replaced it with the one I recently...

Having the following problem with my instrument cluster: Tachometer Stuck at 3200RPM(ish) while running) moves up but not down. Fuel gauge not working. Low Oil pressure all the time (about half way up, never moves, even after a oil change) Engine always says its about a 1/4 over in the...

I am hoping to find out exactly how many LEDs are needed to replace the light cluster behind the speedometer rpm meter etc. I am planning on replacing all the LEDs, including the one behind the 4x4 chooser, thermostat, washer, all LEDs behind the wheel and in the center console. Any info would...

Hey guys was hoping to change or mod the cluster in my 93 cluster. was hoping to put in a white one from a dodge ram wondering if that's even posible?!?! Any help would be GREAT! thanks guys and gals :D

Hey everyone, I have a 2001 Explorer Sport. Some of the lights behind the gauges have gone out so I have decided to replace it with a little something nicer. It's either: or: Now I found both on ebay The First picture The Second Picture I like the second one more but I wanted to know what...

Hi everyone. I replaced my instrument cluster today since it was giving me problems on the speedometer. I had already replace the speedo sensor and that didn't worked. I transferred my odometer to my new cluster using "1998Exploder" tread...

Hi I am new to this site just got logged in and have a question. I have a 95 explorer eddie bauer about 2 months ago my drivers door speaker started to crakle so I slid my deck out to see if the wire was loose,touching ect. when I had my hand back there all of my gauges droped now I have no...