cold air intake

Looking to add a cone filter but the stock filter is connected to the mass air flow sensor. Is there a kit that comes with a sensor integrated in to it?

I have read a lot of post debating the the benefits or lack there of, with installing a cold air intake. I have used modified intakes in the past and liked the sound as well as felt what appeared to me to be some modest performance improvement. So I have two questions. (1) Other than sound, do...

I bought a 2013 PIU with about 85,000 miles on the car, and a new engine at around 25,000 miles just under a year ago and my main goal is to try and make it look as much like a civilian explorer as possible and to add as many features possible. I got it with a carpeted interior without the hand...

Hi All, This is my first post in this amazing forum, this is a great source of info I live in Dubai and I just got a 2008 explorer 4.0 and I really like the drive, I wanted to improve the engine performance without touching the stock engine and I guess this would be mainly on the intake and...

Installed for just a few weeks. Perfect condition. Retails for $330 from Livernois. Offering it for $230 including shipping. I have original sales receipt if desired. PM me if interested. Here is the Livernois link: https://www.livernoismotorsports.com/product/LPP402266 Thanks!

Description basically says it, Ive seen many posts about 3.5 intakes and all but cannot find any posts about the 2.0...so I apologize in advance if there was already a thread discussing it..I swear Ive searched..I know theres two intakes out there that specifically made by K&N and AEM but I see...

hello i have a question about cold air intakes , so this is what i think i know . cold air = dense air = more oxygen= more power with less fuel is that correct? this is my question could i use my A/C and somehow make a duct to go to my stock air box to get cold air into the engine

SOLD: K&N Cold Air Intake For 2011-2016 Explorer SOLD: K&N Performance Intake Kit 77-2575KS. Fits 2011-2016 Explorers w/3.5L N/A V6. K&N 77-2575KS

CAI, cross bars and Husky mats It's been a while since I bought anything for my Ex since I've been focusing all my attention and $$ on my S4, but I have reached a point with the Audi where I am quite happy with it and so now I shift my focus back over to the Ex for a bit. I recently...

I just recently bought a 99 5.0 EB. I bought an explorer cause I wanted to learn how to work on my truck, customize it and upgrade it myself, and cause I've always really liked these trucks. Until a couple weeks ago I knew absolutely nothing about cars, and since my purchase, I've been pouring...

I have a 2000 Ford Explorer that ranges around 14-15mpg city and 20-22mpg highway. Starting September 3 I will be driving about 30 minutes highway everyday to and from home. I work a minimum wage job for the time being, and the amount of money I get won't compensate for the amount of gas that...

just had an engine swap recently and trying to work out a few bugs. there is a loud sucking sound coming from the intake. it sounds like a wind tunnel pulling in air. it comes and goes with a slight fluctuation in rpms when it happens. not pulling a check engine code. just sounds nasty...

I'm buying a cold air intake for my 01 sport trac and I was wondering what's the best brand, I know k&n is a nice one and they've been around forever, but are they worth the extra money over specter or any other brand

I made a video for you guys. Tell me what you think. Hate it or love it? I love it. http://www.youtube.com/watch?v=Th_EG9mKvZA

does anyone know where i could buy a cold air intake

I need one bad. Mine is about an 1/8 of an inch away from my alternator pulley.

First off, there is a button like object right above the air intake that is making it very very difficult for me to take off the air intake casing, i'm wondering what that is. Second of all, would it be substantial to do the cheesebox mod for the casing, AS WELL AS the CAI system? let me know...

Hey I am looking to get a k&n cold air intake for my 03 sport trac. Is this worth it? Will it really give me power and better mpg's?

I am supposed to be buying a 2000 Ford explorer V8 tomorrow and I want to know if a cold air intake really increases the gas mileage and give a noticable power boost?

i have a first gen explorer and im wondering how to do a cold air intake on it. ive seen pics but none are very good. do i have to modify the hood at all is my other concern? i plan to anyway but dont want to yet if i dont have to. any help is appreciated. and GOOD pics if you can show as well...

sorry but one more thing, where can i get a CAI for my 2k 5.0 its killin me!?:exp:

i own a 2003 ford explorer w/4.0.i did an upgrade on my exhaust system and then shortly after installed a K&N cold air intake. And now my engine runs erratic in idle and sometimes even stalls (shuts off) on slow down ( coming to red lights,stop signs,etc. ) There were no problems after changing...

http://cgi.ebay.ca/00-03-EXPLORER-4-0L-VOLANT-CAI-Cold-Air-Intake_W0QQitemZ370194083085QQcmdZViewItemQQptZMotors_Car_Truck_Parts_Accessories?hash=item370194083085&_trksid=p3286.c0.m14&_trkparms=66%3A2|65%3A16|39%3A1|240%3A1318|301%3A0|293%3A7|294%3A50 I'm wondering if this intake will fit on...

ok... i just tried to post this thread but it didnt work so ill try again.. but i'm looking to add some horsepower to my 99 4.0 sohc sport for not very expensive if possible. but i am looking for about 30-50 more horsepower and significant torque too... any suggestions?? i've been reading and it...

for my stock 1994 explorer i would like a cold air intake for it but i went to JCWhitney and they have like 30 different ones i dont which one to get. any suggestions and are they easy to install?