disconnect | Ford Explorer Forums - Serious Explorations

  • Register Today It's free!

disconnect

  1. C

    2 questions in thread. New member so I apologize.

    So, I have been upgrading and restoring my 1997 Explorer XLT 4.0 OHV since I purchased it for under a Grand with 129,000 miles, almost a year ago this month. I haven't had any major issues with the vehicle at all and have put quite a few miles on (160,390) it from driving it to Florida and back...
  2. 5spdman

    Help!

    ok, here's the quick story: i have a 93 explorer sport with a blown head gasket and body mounts rusting out...since working in AZ, i found a 91 xlt with a good motor, but it needed a tranny...easy fix! both 4x4, both manual transmission.... here's the problem: got the tranny up into the...
  3. Insert the tool, and pull on the pipe to disconnect.

    Insert the tool, and pull on the pipe to disconnect.

  4. F

    Disconnect CEL?

    i have to get my truck smogged soon and they wont do it without the CEL being off.. And my CEL is due to the camshaft position sensor being shot (code 214) i dont have the time to replace it right now and want to know if anyone knows how to disconnect the CEL until i get it smogged. Thanks
  5. Try to disconnect a link like this first.

    Try to disconnect a link like this first.

  6. Hold these two points to disconnect.

    Hold these two points to disconnect.

  7. Disconnect stubborn links like this.

    Disconnect stubborn links like this.

  8. A

    Cant get Fuel pump Out

    Finally bit the bullet and decided to drop the tank and pull out the fuel pump yesterday. 96 5.0 awd After struggling to get the tank down a few inches I found the clips connecting the fuel line to the top of the fuel pump the "special tool" I had was too big (thats what she said ;0)~) so I...
  9. Swaybar Disconnect

    Swaybar Disconnect

    These are made by a local shop around here. They are 2 inches longer than stock, but straight. You can see how they are slanted a little.
Back
Top