engine rebuild | Ford Explorer Forums - Serious Explorations

  • Register Today It's free!

engine rebuild

  1. A

    I messed up very badly

    I was doing my injectors and one of them came out and I noticed the o ring and the tiny plastic piece went into the engine. So I already knew this was done for at that point but I stuck this long skinny pencil down there to see if I could feel it and I didn’t. Pulled the pencil out and placed it...
  2. C

    Quick Question

    I've mated my transmission and motor to my 2005 ford explorer successfully.I now have to torque the torque converter bolts.When i put the SUV in neutral and spin the motor by hand using a ratchet.I noticed that it take a little more muscle power to spin the motor.When it spins over...
  3. Ninjakiwi8

    Trouble codes after engine building!

    Hey everyone, so I have a little bit of a problem. Recently I pulled out my 99 4.0 cologne ohv and rebuilt using 422 comp can, different lifters, ect ect. Anyways the build went fine and we installed back into the truck. Connected all the wiring harness back to the 5R55e trans. Well I've driven...
  4. P

    Newbie needing rebuild manual

    HI, I have a 99 Explorer 4.0efi engine needing a rebuild. I am in need of the original Ford service manual or some really good 3rd party help. Any suggestions?
  5. E

    Rebuilding ohv 4.0l

    Recently bought a 92 Eddie Bauer and a 94 Limited. Both automatics with elec-4x4s. Pulled the engine of the Eddie and tore it down to rebuild and put into my 92 XLT. My friends and I have been deburring and porting the heads and block. Also honed the cylinders and are currently working on...
  6. J

    92 4.0 explorer, engine rebuild. no power?

    i have a 92 explorer 4x4 with lost of miles and a long story short i hydrolocked it off roading. i got a 90 ranger 4.0 engine as a doner. had the heads done at the machine shop, valve job, resurfsed, the block i did nothing to, the cylinders had fresh cros hatches on all of them, with no lips...
  7. J

    New and have a few questions

    Ok first I have a 2002 Mercury Mountaineer v6 4.0 non flex fuel. I would like to lift it, but i don't have much money whats the best and cheapest way to do so. Next i would like a brush guard but cant seem to find one made specifically for a Mountaineer. Next is there any maintenance that i can...
Back
Top