• Register Today It's free! This box and some ads will disappear once registered!

^^Searches ExplorerForum.com^^

fog lamps

  1. D

    How to Separate Headlight and Fog light lenses (without home oven)

    Hey guys, So I have been thinking about doing some projector lens retrofitting on my trucks fog lights (or headlights) so I made a video no how to separate the lenses. The headlights are sealed beams 6x7 which are common on older jeeps and pickups, but the fog lights are from my B3000. The...
  2. M

    HID Install +Pics - Step by Step

    Hi All. I finally installed my HID kit today and thought I'd post some step by step pics. I installed these on my 2014 Explorer Sport. I purchased the Coolbulbs kit with the newer electronic ballasts and 6000k color temperature. Part# G1K-9005. I picked these because after all my forum...
  3. N

    How I modified my headlamp/fog switch

    I'm sure most of you early 02 explorer owners have noticed that if you have fog lamps, you can't turn them on in the auto position (if you have auto lamps too). I'm going to tell you how to cut a small piece of a plastic bracket inside the switch so you can turn it on in the auto position. If...
  4. N

    02 Explorer auto headlamp and fog switch modification

    Hi everyone, I'm a newbie to this forum. I've been reading many posts on this site for about 2 years now and I recently decided to get a profile. I've been doing google searches and searches on this forum to find if there is a link somewhere that shows the steps to modify the autolamp switch on...
  5. F

    Adding 2 more Fog Lamps

    First off, if this has been discussed, please provide a link :) Ok, I would like to be a little different and use the stock fog lamps from say a 1996 Explorer XLT and install them on my 1999 XLT. Mine already has the standard fog lamps which are placed on both the far right and far left in...
  6. E

    First time wiring aftermarket fog lights....

    I ended up getting it wired, through the door and into my window, lock switches panel and mounted the switch there. Lights are on and working, still haven't figured out what angle of up or down I am supposed to be doing but for now they are not blinding others. Thank you Tbars for your help...
Top