nut | Ford Explorer - Ford Ranger Forums - Serious Explorations

  • Register Today It's free! This box and some ads will disappear once registered!

nut

  1. Rhaegal94

    1st Gen Front Shock Mounting Nut

    I'm replacing the front shocks on a '94 Explorer. Does anyone know the stock nut type/size for the bottom stud? I want to go buy replacement nuts before I take them off in the event that I'm able to do so without breaking the stud. However, I'm going to by the mounting stud replacement kits...
  2. The nut cracker worked.

    The nut cracker worked.

  3. Nut cracker.

    Nut cracker.

  4. Hold the inner nut in place if it turns.

    Hold the inner nut in place if it turns.

  5. A wheel nut (lug nut) pulls the stud into position.

    A wheel nut (lug nut) pulls the stud into position.

  6. The retaining lock nut with a groove.

    The retaining lock nut with a groove.

  7. Time to solder the nut to the pan.

    Time to solder the nut to the pan.

  8. Clean the nut before soldering.

    Clean the nut before soldering.

  9. Apply soldering paste (flux) to the nut.

    Apply soldering paste (flux) to the nut.

Top