turn signal mod

I'm trying to tap into the turn signal wires (to run additional lighting). There's 3 wires running into the turn signal, 2 of which appear to continue on to the parking lamp. The wire colors are black, yellow, and blue. Black i'm sure is ground. I've stripped the wires and applied a 12V source...

Here's a fix for that annoying notchy turn signal thats hard to push. No more flashing your brights when trying to turn! Tools needed: Small flat head screw driver (For prying and scraping) Torx Screw driver (Either a T-10, or T-15, I don't remember what I used) Metric Socket & an...

Here's a fix for that annoying notchy turn signal thats hard to push. No more flashing your brights when trying to turn! Tools needed: Small flat head screw driver (For prying and scraping) Torx Screw driver (Either a T-10, or T-15, I don't remember what I used) Metric Socket & an extension...

Was bored today at work so I decided I would mess with my front turn signals on my Explorer. This modification incorporates the outer bulb in to the turn signal, where as before it was just a tag light. It does it in two different ways, depending on whether your lights are on or not. When your...