wiring help

Hello, Im about to start a 5.0 swap into my sporttrac, and was wondering if it was possible to swap the entire wiring assembly from the 5.0 into my sporttrac instead of modifying the sporttrac wiring. The reason being is that I would like to swap over the interior from the limited 5.0 and keep...

I needed to change all 02 sensor wires due to some cable burns. I got 4 sensors. Each sensor with4 pins, 2 for the heater and 2 for the signal. In the PCM Pinout 4.0L SOHC as the following pins: The heater is mass controlled by the PCM and connected with a fuse to (+) on the battery. 93 Heated...

Whats up guys, got an issue that I can't pin point and would like a second opinion if someone has dealt with something similar. I have an aftermarket radio in my 2nd gen explorer and most recently it started cutting on and off at will, sometimes for a couple minutes sometimes an hour, lately its...

I replaced the shifter bushing on the steering column yesterday. After this was done the dash lights were very dim, headlights were dim and it would not start. So I left it alone, as I only had 3 hrs sleep and figured it was not a good idea to investigate. I went out this morning and looked at...

Good Morning Everybody, Recently my local parts yard has finally become a u-pull it so the prices have dropped so I have started going to that one versus driving an hr to Baltimore and being mostly unsuccessful lol and its been good so far..I actually came across 2 lincoln Aviators and a...

I have 96 Explorer with the premium audio I believe with the 6 CD changer, I know that if I get a new stereo I'll have to ditch the CD changer which I don't have a problem with. First off, I need some suggestions for a new HU and some speakers, all together I would like to keep it around...