sdwhitney68
New Member
- Joined
- March 18, 2020
- Messages
- 1
- Reaction score
- 0
- City, State
- Rocklin California
- Year, Model & Trim Level
- 06 Explorer XLS 2wd
2 days ago, i was driving and got a wrench on the dash. Didn't know why, then my traction control light came on. Was at a stop light, and when I started driving, check engine light came on, and it went into limp mode. I pulled over, did a series of restarts and was able to make it back home. Since then, I have been trying to figure out why, and it seems if I warm it up, clear the codes a couple times, it doesn't come back. But have not tried taking on a drive after.
Last week, I had gotten a code for the throttle sensor, and it cleared and never came back.
So, I have seen alot of post on here about p2104, but none with just the traction control light, mostly with abs and other lights.
Hoping to get some feedback to get on a right path, since so many options to start fixing. Thank you in advance for any advice
Last week, I had gotten a code for the throttle sensor, and it cleared and never came back.
So, I have seen alot of post on here about p2104, but none with just the traction control light, mostly with abs and other lights.
Hoping to get some feedback to get on a right path, since so many options to start fixing. Thank you in advance for any advice