For Sale 1354M Transfer Case and Shifter

SOLD - 1354M Transfer Case and Shifter

BW 1354 Manual Shift transfer case and shift lever.

I do not know the history of this case - I bought it from the junkyard with the intention of rebuilding it (but never did.) Externally, everything is there.

The shift lever is complete.

SOLD

 

[bimmer4fun]

I am I search of a shifter and linkage. Any idea where I could find it? Thanks! Jeremy

 

[Scott B.]

I am I search of a shifter and linkage. Any idea where I could find it? Thanks! Jeremy

Buy mine - I'll through in the transfer case!

 

[bimmer4fun]

I got a transfer case for $150.00 so I don't need that part. Thanks

 

[adamsbro2]

Where are you located?

 

[bimmer4fun]

Explorer transfer case swap

I am in Anniston Alabama and I have everything except the transfer case shift boot.

 

[RangerX]

Scott, just curious, what's that white plastic part in a bag?

 

[Scott B.]

Scott, just curious, what's that white plastic part in a bag?

It is a bushing for the linkage. It goes on the transfer case side - I'd have to look at my exisiting one to tell you exactly where it goes (I don't remember off the top of my head.)

 

[Xeek]

Do you have an a4ld to go with it? Lol im in need of the 4wd tranny also

 

[Scott B.]

Do you have an a4ld to go with it? Lol im in need of the 4wd tranny also

No transmission. My A4LD was slipping pretty bad when I pulled it for the V8 swap, so I didn't keep it.

 

[Xeek]

Yea i got a friend.thats gonna see if we have enough parts to get to 4wd conversion. Either here or in a pm, see out much shipping would cost, 23462

 

[Scott B.]

Still available.

 

[Scott B.]

Bump

 

[97Rangerboy]

Is it still available

 

[Scott B.]

Yes

 

[jamoffroad1966]

how much do you think it weights? for shipping ? to ca

 

[Stic-o]

It is a bushing for the linkage. It goes on the transfer case side - I'd have to look at my exisiting one to tell you exactly where it goes (I don't remember off the top of my head.)

That plastic piece is gold. It is a discontinued part from what I hear. It's needed for the shift linkage.

Can you post part number on the bag please

 

[Explorin'VA]

Has anyone used an alternative bushing besides the ford part? Can the ford bushing be removed from a junk yard truck a re-used? Thanks

 

[Fordsgalore4]

if you still have the part number for that bushing I just bought the hole set up from a junk yard and that part is shot

 

[zukman]

just converted to a manual t case and yep no bushing. Easy fix!!! tap out the linkage stud and insert a 3/8 stainless bolt use washers on either side (loose) locking nut. Be sure to tag weld the bolt head to linkage.