indymadcaster
New Member
- Joined
- October 16, 2011
- Messages
- 6
- Reaction score
- 0
hello,
I need help as i am out of ideas!
my 1988 BII 2.9 gets warm and falls on its butt! never quits just NO power when warm and will not Rev over 2k rpm It has had the following, fuel pump,fuel press reg, filters, injectors, TFI and pickupand reman dist, Dropped the cat converter, New TP sensor and air charge, ECT, new O2 and a Map sensor cap, rotor and wires, ign coil, AND a PCM!!!!
I am a ford tech @ a dealer and the dang thing has all of us stumped,
started out had to drive it 30 -40 min to do this 2 years ago now as soon as it goes from closed loop to open it runs rough and drops power when its in closed loop it runs awesome! goes to warm open loop falls on its butt
any ideas?
I need help as i am out of ideas!
my 1988 BII 2.9 gets warm and falls on its butt! never quits just NO power when warm and will not Rev over 2k rpm It has had the following, fuel pump,fuel press reg, filters, injectors, TFI and pickupand reman dist, Dropped the cat converter, New TP sensor and air charge, ECT, new O2 and a Map sensor cap, rotor and wires, ign coil, AND a PCM!!!!
I am a ford tech @ a dealer and the dang thing has all of us stumped,
started out had to drive it 30 -40 min to do this 2 years ago now as soon as it goes from closed loop to open it runs rough and drops power when its in closed loop it runs awesome! goes to warm open loop falls on its butt
any ideas?