1992 Ranger Transfer Case/Clutch Install | Ford Explorer - Ford Ranger Forums - Serious Explorations
  • Register Today It's free!

1992 Ranger Transfer Case/Clutch Install

BTRs X

Elite Explorer
Joined
January 7, 2002
Messages
686
Reaction score
3
City, State
Maysville, KY
Year, Model & Trim Level
'92 Explorer XL 4x4
I have a 1992 Ford Ranger with a 4cyl, 5-speed manual and electronic 4x4. Im getting ready to remove the tranny to install a new clutch and slave cylinder. Can I drop the transmission without removing/draining the transfer case? If I can do this...do I have to drain the tanny?

I have done clutches before in my Mustangs, but never a 4x4. Thanks.
 






RangerX

Elite Ranger
Staff member
Moderator
Elite Explorer
Joined
July 14, 1999
Messages
10,418
Reaction score
646
City, State
Omao, Kauai
Year, Model & Trim Level
'93 Ranger XLT 4X4
You don't have to drain either, but it would make them both slighty lighter. If you're using a trnny jack, it wouldn't matter, if you're going to 'benchpress' them out and in, it might!

I've read of people (410, I think) removing the trans and t-case together as one piece, but I seperated them when I did my clutch.

If you do a search for "replace clutch", there's a couple good threads here.

Good luck!
 






BTRs X

Elite Explorer
Joined
January 7, 2002
Messages
686
Reaction score
3
City, State
Maysville, KY
Year, Model & Trim Level
'92 Explorer XL 4x4
thanks.
 






Top