LG57
Active Member
- Joined
- November 29, 2018
- Messages
- 98
- Reaction score
- 75
- City, State
- Katy Tx
- Year, Model & Trim Level
- 1993 Explorer Sport
I'm new to the forum. I have a 1993 Sport 2wd 5-speed. I'm trying to resurrect it after sitting for 17 years. So far, no start. Here's the things I've done so far:
1. Pull gas tank, clean and new fuel pump
2. New fuel filter. Air filter, PCV valve
3. New spark plugs, plug wires, coil pack
4. New battery cables
5. New starter solenoid
6. New starter
7. Clean throttle body
8. Compression test-all 150 to 180lb.
9. Verified fuel to fuel rail, but not pressure
10. Ran code reader KOEO--no codes
11. Checked Elec dist box for loose corroded wires--nothing found
12. all fuses good
13. Switched relays around
After all that, it seems to be trying to start, but maybe only hitting on one cylinder and won't go ahead and light off.
What would you try next?
Oh, also unplugged and reconnected crankshaft position sensor.
1. Pull gas tank, clean and new fuel pump
2. New fuel filter. Air filter, PCV valve
3. New spark plugs, plug wires, coil pack
4. New battery cables
5. New starter solenoid
6. New starter
7. Clean throttle body
8. Compression test-all 150 to 180lb.
9. Verified fuel to fuel rail, but not pressure
10. Ran code reader KOEO--no codes
11. Checked Elec dist box for loose corroded wires--nothing found
12. all fuses good
13. Switched relays around
After all that, it seems to be trying to start, but maybe only hitting on one cylinder and won't go ahead and light off.
What would you try next?
Oh, also unplugged and reconnected crankshaft position sensor.