1995 2nd gen 4x4 low stop working | Ford Explorer - Ford Ranger Forums - Serious Explorations
  • Register Today It's free!

1995 2nd gen 4x4 low stop working

Pete Deering

Well-Known Member
Joined
November 13, 2019
Messages
539
Reaction score
223
City, State
New England
Year, Model & Trim Level
1995 xlt 4 door 4x4
1995 2nd gen 4x4 low stop working. It worked, than did not work. Now its not working. I replaced the GEM module, selector switch, and transfer case shift motor. No change. Still have the issue. From this forum, someone states, there is a additional relay in the dash, that commands the GEM module to Change states. Does anyone know the location? Or know the solution to this problem?
 






4Stan

New Member
Joined
February 6, 2022
Messages
4
Reaction score
2
City, State
Soquel , California
Year, Model & Trim Level
1995 Explorer XLT 4WD
1995 2nd gen 4x4 low stop working. It worked, than did not work. Now its not working. I replaced the GEM module, selector switch, and transfer case shift motor. No change. Still have the issue. From this forum, someone states, there is a additional relay in the dash, that commands the GEM module to Change states. Does anyone know the location? Or know the solution to this problem?
engaging sequence must be followed , foot on the brake vehicle in neutral or clutch depressed, do not drive in 4x low on hard dry surfaces, pull fuses 17 and 18 if hearing a spinning noise magnetic clutch to 4x auto not functioning ! Possibly from not sequencing tranasfer>
best could come up with on short notice
 






Top