Taube
Active Member
- Joined
- May 25, 2019
- Messages
- 77
- Reaction score
- 14
- City, State
- Hamilton
- Year, Model & Trim Level
- 1996 ford explorer awd
Ok had an old post put a 2000 drive train no transfer case in my 96. Already did engine parts swap. In the old thread I switched the park/rev/neutral switch and did the wire conversion for the shifting solenoid plug. First off not all colours matched as per old thread ??? And now truck won't start. I found no power at the starter solenoid but when I jump it she runs. I think all has to do with the wires to the trans. None of the wiring diagrams colours match mine. 96 5.0 and the 2000 5.0 4r70w.. help.......